Gemini GEM-DXK3 Operating Manual page 19

17
INTERIOR BYPASS FIRE/TBL SYS TBL
18
INTERIOR BYPASS FIRE/TBL SYS TBL
19
INTERIOR BYPASS FIRE/TBL SYS TBL
F U N C T I O N M E N U
17. Activate Program? Activates the Program Mode from Keypad No. 1. Note:
This feature is disabled while armed. (See PROGRAMMING USER CODES)
CHIME
18. Activate Download? For installer's use only. If accidentally enabled, press
to exit.
C
CHIME
Note: This feature is disabled while armed.
19. Relay Control?
Turns ON or OFF one or more programmed Relay Group. Press
CHIME
displayed group on or off; press NEXT(
PRIOR ( ) to scroll back to the previous group. Press
Q
• Relay Group 01: [ ____________________________________ ]
• Relay Group 02: [ ____________________________________ ]
• Relay Group 03: [ ____________________________________ ]
• Relay Group 04: [ ____________________________________ ]
• Relay Group 05: [ ____________________________________ ]
• Relay Group 06: [ ____________________________________ ]
• Relay Group 07: [ ____________________________________ ]
• Relay Group 08: [ ____________________________________ ]
(Relay Control programmed?
P
YES NO) (GEM-P3200/9600 panels only)
U
) to proceed to the next group, or
when done.
C
to turn the
19