Table of Contents
Advertisement
15
INTERIOR BYPASS
FIRE/TBL SYS TBL
16
INTERIOR BYPASS
FIRE/TBL SYS TBL
18
F U N C T I O N M E N U
15. Activate Telephone Test?
communicator test to the central station. A communication failure will be indicated
at the keypad by a system trouble "E03-00" display. Repeat the test to attempt to
CHIME
correct a communication failure, as any successful communication will clear this
display.
16. Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set
to arm automatically after a delay period of 1 to 4 hours.
CHIME
To Delay Arm the system:
•
With Function 16 in the window, enter the desired Delay Arming time in hours
(
,
1
2
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
(Telephone Test programmed?
,
), followed by
,or
3
4
YES
NO).
U
.
, but it will turn
C
Sends a
Advertisement
Table of Contents
