Messages Displayed When Using The Printer Function - Ricoh MP CW2200SP User Manual

9. Troubleshooting
• If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the
memory becomes full, the memory overflow message will not be displayed. The machine will make
copies of the scanned originals first, and then automatically proceed to scan and to copy the
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input / Output", Copy/ Document Server

Messages Displayed When Using the Printer Function

This section describes the principal messages that appear on the display panel, error logs or reports. If
other messages appear, follow their instructions.
Status messages
Message
"Hex Dump Mode"
"Job Suspended..."
"Offline"
"Please wait."
"Printing..."
"Ready"
"Resetting job..."
180
In Hex Dump Mode, the machine receives data in hexadecimal
format. Press [Job Reset] to cancel Hex Dump Mode.
Printing was temporarily stopped by SmartDeviceMonitor for Client.
You can resume printing via [My Job List] in SmartDeviceMonitor for
Client, or via the Web Image Monitor. To resume printing via Web
Image Monitor, ask your system administrator first.
The machine is offline.
• This message might appear for a second or two while the
machine is preparing, performing initial adjustments, replenishing
ink, or executing maintenance operations. Wait a while.
• The current environmental condition is outside the recommended
temperature range for the machine. Check the optimum
environmental conditions for the machine and move it to a
different location, or leave the machine for a while and allow it to
adapt to the environment.
The machine is printing. Wait a while.
This is the default ready message. The machine is ready for use. No
action is required.
The machine is resetting the print job. Wait until "Ready" appears on
the display panel.
.
Status