Chapter 4 Basic; Basic Settings - Kyocera ECOSYS FS-C5350DN Printer Driver User Manual

Basic Settings

Printer Driver
4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Page Sizes
This setting should match the page size setting in your application. The
printing result is based on the page size specified in this setting. You can
also create a custom page size.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Destination
This setting specifies which output tray is used for the print job output.
4-1