Page Setup; Scan Preview - Lexmark MX610 User Manual

E-mailing

Page Setup

This option lets you change the following settings:
•
Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper.
This also identifies what needs to be scanned for inclusion in the e-mail.
•
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and
Binding settings to match the orientation.
• Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned,
the scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
Using the advanced options
Select from the following settings:
•
Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, and Sharpness settings before you e‑mail the
document.
•
Custom Job—This combines multiple scanning jobs into a single job.
•
Edge Erase—This removes smudges or marks around the edges of a document. You can choose to remove an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area
selected, leaving nothing on that portion of the scan.
•
Transmission Log—This prints the transmission log or transmission error log.
• Fix Scan Skew—This straightens scanned images that are slightly skewed when received from the ADF tray.
Note: This option is supported only in select printer models.
107