D.adapetc Raid Driver Installation - Gigabyte GA-8IKHXT User Manual

GA-8IKHXT Motherboard
D. Adapetc RAID Driver Installation
Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver
CD-title will auto start and show a series of Setup Wizard dialog boxes. If not, please double click the
CD-ROM device icon in "My computer", and execute the setup.exe.
Installation Procedures:
1. The CD auto run program starts, Double click on "Promise RAID IDE Driver" to start the
installation.
2. Then, a series of installation wizards appear. Follow up the wizards to install the drivers.
3.Setup completed, click "Finish" to restart your computer.
Note: User must enable "SATA RAID" function in the BIOS setup meun before installing
Adaptec RAID driver.
Auto Run windows
1. Click "Adaptec RAID Driver"
item.
(1)
Refer to yor operating systsem,
select the desired folder to install
SATA RAID driver.
(3)
Serial ATA Driver Operating System
Selection
2. Click the 2.01.016 folder to
install the SATA driver.
(2)
64