1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-8IG1000MK
  6. User manual

Gigabyte GA-8IG1000MK User Manual

P4 titan series motherboard
Hide thumbs Also See for GA-8IG1000MK:
Table of Contents

Advertisement

Quick Links

When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X (1.5V).
AGP 4X/8X notch
Caution: AGP 2X card is not supported by Intel
845(GE/PE) / 845(E/G) /
®
850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode
by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8IG1000MK (or any AGP 4X/8X only) motherboards might not
function properly, if you install this card without switching the jumper to
4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V)
only. The GA-8IG1000MK (or any AGP 4X/8X only) motherboards might not
function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel
845(GE/PE) /
®
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte GA-8IG1000MK

Summary of Contents for Gigabyte GA-8IG1000MK

  • Page 1 & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V) only. The GA-8IG1000MK (or any AGP 4X/8X only) motherboards might not function properly, If you install this card in it.
  • Page 2 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard.

  • Page 3: Declaration Of Conformity

    Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-8IG1000MK is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...
  • Page 4 City of Industry, CA 91748 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number: GA-8IG1000MK Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules.
  • Page 5 GA-8IG1000MK P4 Titan Series Motherboard USER'S MANUAL Pentium 4 Processor Motherboard ® Rev. 1004 12ME-8IG1KMK-1004...

  • Page 6: Table Of Contents

    Table of Content Warning ....................4 Chapter 1 Introduction ................5 Features Summary ..................5 GA-8IG1000MK Motherboard Layout ............7 Block Diagram ..................... 8 Chapter 2 Hardware Installation Process ..........11 Step 1: Install the Central Processing Unit (CPU)........12 Step 1-1: CPU Installation ....................
  • Page 7 Frequency/Voltage Control ................ 52 Load Fail-Safe Defaults ................54 Load Optimized Defaults ................55 Set Supervisor/User Password ..............56 Save & Exit Setup ..................57 Exit Without Saving ................... 58 Chapter 4 Technical Reference ............61 @BIOS Introduction ................. 61 ™...

  • Page 8: Warning

    PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it may damage the board or cause board malfunctioning. GA-8IG1000MK Motherboard - 4 -...

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction Features Summary Form Factor 24.3cm x 24.3cm Micro ATX size form factor, 4 layers PCB Socket 478 for Intel Micro FC-PGA2 Pentium 4 processor ® ® Support Intel Pentium 4 (Northwood, Prescott) processor ® ® Support Intel Pentium 4 Processor with HT Technology * ®...
  • Page 10 CPU, chipset and most of the peripherals. Whether your system can run under these specific bus frequencies properly will depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards…etc. GA-8IG1000MK Motherboard - 6 -...

  • Page 11: Ga-8Ig1000Mk Motherboard Layout

    GA-8IG1000MK Motherboard Layout KB_MS DIMM_LED R_USB CPU_FAN SOCKET 478 ATX_12V Intel 82562EZ AUDIO1 Intel 865G COMB 2X_DET ITE8712 PCI1 SYS _FAN CLR_PWD CD_IN Intel ICH5 SUR_CEN AUX_IN PCI2 SATA1 CODEC PCI3 Buzzer SATA0 BIOS PWR_LED GAME IR_CIR INFO_LINK F_USB1 F_USB2...

  • Page 12: Block Diagram

    33 MHz ATA33/66/100 2 COM Ports AC97 IDE Channels CODEC 8 USB 2 Serial ATA Ports PCICLK (33MHz) PCICLK (33MHz) CPUCLK+/- (100/133/200MHz) USBCLK (48MHz) AGPCLK (66MHz) CLK GEN 14.318 MHz MCHCLK (100/133/200mHz) 33 MHz ICH3V66 (66MHz) GA-8IG1000MK Motherboard - 8 -...
  • Page 13 - 9 - Introduction...
  • Page 14 GA-8IG1000MK Motherboard - 10 -...

  • Page 15: Chapter 2 Hardware Installation Process

    Chapter 2 Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 1 Step 4 Step 2...

  • Page 16: Step 1: Install The Central Processing Unit (Cpu)

    "cough" made. Pin1 indicator Pin1 indicator 4. Locate Pin 1 in the socket and 3. CPU Top View look for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. GA-8IG1000MK Motherboard - 12 -...

  • Page 17: Step 1-2: Cpu Cooling Fan Installation

    Step 1-2: CPU Cooling Fan Installation Before installing the CPU cooling fan, adhere to the following warning: 1. Please use Intel approved cooling fan. 2. We recommend you to apply the thermal tape to provide better heat conduction between your CPU and cooling fan. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste.

  • Page 18: Step 2: Install Memory Modules

    2. Insert the DIMM memory module vertically into the DIMM socket. Then push it down. 3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module. GA-8IG1000MK Motherboard - 14 -...

  • Page 19: Ddr Introduction

    When Dual Channel Technology is activated, the bandwidth of memory bus will be double the original one,with the fastest speed at 6.4GB/s DDR400. GA-8IG1000MK includes four DIMM slots, and each Channel has 2 DIMMs as following: Channel A : DIMM 1, 2...

  • Page 20: Step 3: Install Expansion Cards

    When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X (3.3V) is not supported by the chipset. GA-8IG1000MK Motherboard - 16 -...

  • Page 21: Step 4: Connect Ribbon Cables, Cabinet Wires And Power Supply

    Step 4: Connect ribbon cables, cabinet wires and power supply Step 4-1: I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector This connector supports standard PS/2 PS/2 Mouse Connector keyboard and PS/2 mouse. (6 pin Female) PS/2 Keyboard Connector (6 pin Female) USB/LAN Connector Before you connect your device(s) into USB...

  • Page 22: Audio Connectors

    Connect "Center and Subwoofer" to "MIC Out ". Method2: You can refer to page 28, and contact your nearest dealer for optional SUR_CEN cable. If you want the detail information for 2-/4-/6-channel audio setup installation, please refer to page 67. GA-8IG1000MK Motherboard - 18 -...

  • Page 23: Step 4-2: Connectors Introduction

    Step 4-2: Connectors Introduction 1) ATX_12V 13) F_AUDIO 2) ATX 14) CD_IN 3) CPU_FAN 15) AUX_IN 4) SYS_FAN 16) SUR_CEN 5) FDD 17) F_USB1 / F_USB2 6) IDE1 / IDE2 18) COMB 7) SATA0 / SATA1 19) IR_CIR 8) BAT 20) GAME 9) F_PANEL 21) INFO_LINK...
  • Page 24 AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. Pin No. Definition 3.3V 3.3V Power Good 5V SB (stand by +5V) +12V 3.3V -12V PS_ON(soft on/off) GA-8IG1000MK Motherboard - 20 -...
  • Page 25 3) CPU_FAN (CPU Fan Connector) Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating. The CPU fan connector supports Max. current up to 600 mA. Pin No.
  • Page 26 6) IDE1 / IDE2 (IDE1 / IDE2 Connector) Important Notice: Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1. IDE2 IDE1 GA-8IG1000MK Motherboard - 22 -...
  • Page 27 7) SATA0 / SATA1 (Serial ATA Connector) You can connect the Serial ATA device to this connector, it provides you high speed transfer rates (150MB/sec). Pin No. Definition SATA1 SATA0 8) BAT (BATTERY) CAUTION Danger of explosion if battery is incorrectly replaced.
  • Page 28 Open: Normal Operation (Green) Close: Reset Hardware System PW (Soft Power Connector) Open: Normal Operation (Red) Close: Power On/Off MSG(Message LED/ Power/ Sleep LED) Pin 1: LED anode(+) (Yellow) Pin 2: LED cathode(-) NC (Purple) GA-8IG1000MK Motherboard - 24 -...
  • Page 29 10) PWR_LED PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color. Pin No. Definition MPD+ MPD-...
  • Page 30 Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. Pin No. Definition Power Front Audio (R) Rear Audio (R) Reserved No Pin Front Audio (L) Rear Audio (L) GA-8IG1000MK Motherboard - 26 -...
  • Page 31 14) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition CD-L CD-R 15) AUX_IN (AUX In Connector) Connect other device (such as PCI TV Tunner audio out) to the connector. Pin No. Definition AUX-L AUX-R - 27 -...
  • Page 32 Be careful with the polarity of the front USB connector. Check the pin assignment while you connect the front USB cable. Please contact your nearest dealer for optional front USB cable. F_USB1 F_USB2 Pin No. Definition Power Power USB Dx- USB Dy- USB Dx+ USB Dy+ No Pin GA-8IG1000MK Motherboard - 28 -...
  • Page 33 Make sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR/CIR function on the board, you are required to purchase an option IR/CIR module. For detail information please contact your autherized Gigabyte distributor. To use IR function only, please connect IR module to Pin1 to Pin5.
  • Page 34 GPY2_R MSI_R GPSA1 GPY1_R GPSB1 MSO_R GPSB2 No Pin 21) INFO_LINK This connector allows you to connect some external devices to provide you extra function. Pin No. Definition SMBCLK SMBDATA GPIO No Pin +12V +12V GA-8IG1000MK Motherboard - 30 -...
  • Page 35 22) CI (CASE OPEN) This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the system case begin remove. Pin No. Definition Signal 23) CLR_PWD When Jumper is set to "open" and system is restarted, the password that is set will be cleared. On the contrary when Jumper is set to "close", the current status remains.
  • Page 36 GA-8IG1000MK Motherboard - 32 -...

  • Page 37: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Powering ON the computer and pressing <Del>...

  • Page 38: Getting Help

    If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option widden. Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. GA-8IG1000MK Motherboard - 34 -...

  • Page 39: Integrated Peripherals

    Integrated Peripherals This setup page includes all onboard peripherals. Power Management Setup This setup page includes all the items of Green function features. PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. PC Health Status This setup page is the System auto detect Temperature, voltage, fan, speed.

  • Page 40: Standard Cmos Features

    The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) Year The year, from 1999 through 2098 GA-8IG1000MK Motherboard - 36 -...
  • Page 41 Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Primary Master, Slave / IDE Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer.

  • Page 42: Base Memory

    640 K for systems with 640 K or more memory installed on the motherboard. Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1MB in the CPU's memory address map. GA-8IG1000MK Motherboard - 38 -...

  • Page 43: Advanced Bios Features

    Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2003 Award Software Advanced BIOS Features First Boot Device [Floppy] Item Help Second Boot Device [HDD-0] Menu Level Third Boot Device [CDROM] Select Boot Device Password Check [Setup] Priority # CPU Hyper-Threading [Enabled] On-Chip Frame Buffer Size [16MB] [Floppy]...
  • Page 44 Set onboard VGA frame buffer as 16MB. (Default value) 32MB Set onboard VGA frame buffer as 32MB. " # " System will detect automatically and show up when you install the Intel ® Pentium ® 4 processor with HT Technology. GA-8IG1000MK Motherboard - 40 -...

  • Page 45: Integrated Peripherals

    Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2003 Award Software Integrated Peripherals On-Chip Primary PCI IDE [Enabled] Item Help On-Chip Secondary PCI IDE [Enabled] Menu Level On-Chip SATA [Auto] If a hard disk x SATA Port0 Configure as SATA Port0 controller card is SATA Port1 Configure as SATA Port1 used, set at Disabled...

  • Page 46: Usb Controller

    SATA controller set to SATA port1. As this mode, it support by WinXP or later OS only. SATA Port1 Configure as The values depend on SATA Port0. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. GA-8IG1000MK Motherboard - 42 -...

  • Page 47: Usb Keyboard Support

    USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.0 Controller. USB Keyboard Support Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. (Default value) USB Mouse Support Enabled Enable USB Mouse Support.

  • Page 48: Onboard Serial Port 2

    I/O controller. Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. GA-8IG1000MK Motherboard - 44 -...

  • Page 49: Parallel Port Mode

    Parallel Port Mode This feature allows you to connect with an advanced printer via the port mode it supports. Using Parallel port as Standard Parallel Port. (Default Value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP &...

  • Page 50: Power Management Setup

    In standby mode(S1), power LED will blink. (Default Value) Dual/OFF In standby mode(S1): a. If use single color LED, power LED will turn off. b. If use dual color LED, power LED will turn to another color. GA-8IG1000MK Motherboard - 46 -...

  • Page 51: Resume By Alarm

    Off by Power button Instant-off Press power button then Power off instantly. (Default value) Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed less than 4 sec. PME Event Wake Up Disabled Disable this function.

  • Page 52: Kb Power On Password

    When AC-power back to the system, the system will be in "Off" state. (Default Value) Full-On When AC-power back to the system, the system always in "On" state. Memory When AC-power back to the system, the system will return to the Last state before AC-power off. GA-8IG1000MK Motherboard - 48 -...

  • Page 53: Pnp/Pci Configurations

    PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2003 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment [Auto] Item Help PCI 2 IRQ Assignment [Auto] Menu Level PCI 3 IRQ Assignment [Auto] : Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 6: PnP/PCI Configurations PCI 1 IRQ Assignment Auto...

  • Page 54: Pc Health Status

    If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save CMOS, your computer will restart. Current Voltage (V) Vcore / DDR25V / +3.3V / +5V / +12V Detect system's voltage status automatically. GA-8IG1000MK Motherboard - 50 -...

  • Page 55: Current Cpu Temperature

    Current CPU Temperature Detect CPU Temp. automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/POWER/SYSTEM Fan speed status automatically. CPU Warning Temperature C / 140 Monitor CPU Temp. at 60 C / 140 C / 158 Monitor CPU Temp. at 70 C / 158 C / 176 Monitor CPU Temp.

  • Page 56: Frequency/Voltage Control

    Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot. When time out occur, system will reset and run at CPU default Host clock at next boot. Disabled Disable CPU Host Clock Control. (Default value) Enabled Enable CPU Host Clock Control. GA-8IG1000MK Motherboard - 52 -...
  • Page 57 CPU Host Frequency (Mhz) 100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz. Incorrect using it may cause your system broken. For power End-User use only! AGP/PCI/SRC Fixed Serial ATA device is very sensitive to SRC clock. SRC over clock may make Serial ATA device function can't work properly.

  • Page 58: Load Fail-Safe Defaults

    : Select Item F8: Q-Flash F10: Save & Exit Setup Load Fail-Safe Defaults Figure 11: Load Fail-Safe Defaults Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. GA-8IG1000MK Motherboard - 54 -...

  • Page 59: Load Optimized Defaults

    Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2003 Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Load Optimized Defaults (Y/N) ? Y Power Management Setup Set User Password PnP/PCI Configurations Save &...

  • Page 60: Set Supervisor/User Password

    Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup. GA-8IG1000MK Motherboard - 56 -...

  • Page 61: Save & Exit Setup

    Save & Exit Setup CMOS Setup Utility-Copyright (C) 1984-2003 Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Save to CMOS and EXIT (Y/N) ? Y Power Management Setup Set User Password PnP/PCI Configurations Save &...

  • Page 62: Exit Without Saving

    : Select Item F8: Q-Flash F10: Save & Exit Setup Abandon all Data Figure 15: Exit Without Saving Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility. GA-8IG1000MK Motherboard - 58 -...
  • Page 63 - 59 - BIOS Setup...
  • Page 64 GA-8IG1000MK Motherboard - 60 -...

  • Page 65: Chapter 4 Technical Reference

    Or you may want to keep a backup for your current BIOS, just choose "Save Current BIOS" to save it first. You make a wise choice to use Gigabyte, and @BIOS update your BIOS smartly. You are now worry free from updating wrong BIOS, and capable to maintain and manage your BIOS easily.

  • Page 66: Easytune ™ 4 Introduction

    4 has already turned the "Overclock" technology toward to a newer generation. This wonderful software is now free bundled in Gigabyte motherboard attached in driver CD. Users may make a test drive of "EasyTune 4" to find out more amazing features by themselves.

  • Page 67: Flash Bios Method Introduction

    Flash BIOS Method Introduction Method 1 : Q-Flash A. What is Q-Flash Utility? Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS mode, no more fooling around any OS. B. How to use Q-Flash? a.
  • Page 68 [Enter] to contiune or [ESC] to abort ... Press Enter to Run. !! Copy BIOS Completed - Pass !! Please press any key to continue ... Congratulation! You have completed the flashed and now can restart system. GA-8IG1000MK Motherboard - 64 -...
  • Page 69 Method 2 : @BIOS Utility If you don't have DOS boot disk, we recommend that you used Gigabyte @BIOS program to flash ™ BIOS. Press here. 2. Click Start/ All Programs/ GIGABYTE/ @BIOS. 1. Click "@BIOS" item. Click here 3.Click " ".
  • Page 70 In method I, if the BIOS file you need cannot be found in @BIOS server, please go onto ™ Gigabyte's web site for downloading and updating it according to method II. d. Please note that any interruption during updating will cause system unbooted GA-8IG1000MK Motherboard...

  • Page 71: 4- / 6-Channel Audio Function Introduction

    2- / 4- / 6-Channel Audio Function Introduction The installation of Windows 98SE/2K/ME/XP is very simple. Please follow next step to install the function! Stereo Speakers Connection and Settings: We recommend that you use the speaker with amplifier to acqiire the best sound effect if the stereo output is applied.
  • Page 72 4 speakers out put". Disable "Only SURROUND-KIT", and press "OK". When the "Environment settings" is "None", the sound would be performed as stereo mode (2 chan- nels output). Please select the other settings for 4 channels output. GA-8IG1000MK Motherboard - 68 -...
  • Page 73 Basic 6 Channel Analog Audio Output Mode Use the back audio panel to connect the audio output without any additional module. STEP 1 : Connect the front channels to "Line Out", the rear Line In channels to "Line In", and the Center/Subwoofer channels to "MIC In".
  • Page 74 MIC at the same time. STEP 1 : Insert the "SURROUND-KIT" in the back of the case, and fix it with the screw. STEP 2 : Connect the "SURROUND-KIT" to SUR_CEN on the motherboard. GA-8IG1000MK Motherboard - 70 -...
  • Page 75 STEP 3 : Connect the front channels to back audio panel's "Line Out", the rear channels to SURROUND-KIT's REAR R/L, and the Center/Subwoofer channels to SURROUND-KIT's SUB CENTER. STEP 4 : Click the audio icon "Sound Effect" from the win- dows tray at the bottom of the screen.

  • Page 76: Jack-Sensing Introduction

    Please connect the devices to the right jacks as above. A window will appear as right picture if you setup the devices properly. Please note that 3D audio function will only appear when 3D audio inputs. GA-8IG1000MK Motherboard - 72 -...
  • Page 77 If you set wrong with the connectors, the warning message will come out as right picture. Manual setting: If the device picture shows different from what you set, please press "Manual Selection" to set. - 73 - Technical Reference...

  • Page 78: Xpress Recovery Introduction

    1. System data and hard disk's reading/writing speed will affect backing up speed. 2. It is supported by Intel 865 / 875 chipset, nVIDIA nForce 2 chipset and SiS 648FX chipset based motherboard from Gigabyte. How to use the Xpress Recovery a.
  • Page 79 Xpress Recovery: Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technilogy CO. , Ltd. 1. Excute Backup Utility 2. Excute Restore Utility 3. Remove Backup Image 4. Exit and Restart 1.Excute Backup Utility: Press B to Backup your System or Esc to Exit The Backup utility will scan the system automatically and back it up.
  • Page 80 GA-8IG1000MK Motherboard - 76 -...

  • Page 81: Chapter 5 Appendix

    Revision History Chapter 5 Appendix Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe.
  • Page 82 Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller" under "Device Manager". Please remove the question mark and restart the system (System will auto-detect the right USB2.0 driver). GA-8IG1000MK Motherboard - 78 -...

  • Page 83: Software Application

    SOFTWARE APPLICATION This page reveals the value-added software developed by Gigabyte and its worldwide partners. Gigabyte Windows Utilities Manager (GWUM) This utility can integrate the Gigabyte's applications in the system tray Gigabyte Management Tool (GMT) A useful tool which can manage the computer via the network...

  • Page 84: Software Information

    SOFTWARE INFORMATION This page list the contects of softwares and drivers in this CD title. HARDWARE INFORMATION This page lists all device you have for this motherboard. CONTACT US Please see the last page for details. GA-8IG1000MK Motherboard - 80 -...
  • Page 85 EasyTune 4 Utilities Installation Powerful utility that integrates the overclocking and hardware monitoring functions 1. Click "EasyTune4" item. 2. Click "Next". 3. Click "Finish" to restart computer. 4. Right Click the icon to start "EasyTune 4". - 81 - Appendix...
  • Page 86 Question 6: How do I disable onboard VGA card in order to add an external VGA card? Answer: Gigabyte motherboards will auto-detect the external VGA card after it is plugged in, so you don't need to change any setting manually to disable the onboard VGA.
  • Page 87 Question 7: Why cannot I use the IDE 2? Answer: Please refer to the user manual and check whether you have connected any cable that is not provided with the motherboard package to the USB Over Current pin in the Front USB Panel. If the cable is your own cable, please remove it from this pin and do not connect any of your own cables to it.

  • Page 88: Troubleshooting

    Check if the memory install properly into the DIMM slot. module vertically into the DIMM slot. Failure has been excluded. Insert the VGA card. Then plug in ATX power cable and turn on the system. GA-8IG1000MK Motherboard - 84 -...
  • Page 89 If the above procedure unable to solve your problem, please contact with your local retailer or national distributor for help. Or, you could submit your question to the service mail via Gigabyte website technical support zone (http://www.gigabyte.com.tw). The appropriate response will be provided ASAP.
  • Page 90 Model name/Lot Number: PCB revision: BIOS version: O.S./A.S.: Hardware Mfs. Model name Size: Driver/Utility: Configuration Memory Brand Video Card Audio Card CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Problem Description: GA-8IG1000MK Motherboard - 86 -...
  • Page 91 Acronyms Acronyms Meaning ACPI Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communications Riser BIOS Basic Input / Output System Central Processing Unit CMOS Complementary Metal Oxide Semiconductor CRIMM Continuity RIMM Communication and Networking Riser Direct Memory Access Desktop Management Interface DIMM...
  • Page 92 Network Interface Card Operating System Original Equipment Manufacturer PCI A.G.P. Controller POST Power-On Self Test Peripheral Component Interconnect RIMM Rambus in-line Memory Module Special Circumstance Instructions SECC Single Edge Contact Cartridge SRAM Static Random Access Memory GA-8IG1000MK Motherboard - 88 -...
  • Page 93 - 89 - Appendix...
  • Page 94 GA-8IG1000MK Motherboard - 90 -...
  • Page 95 Contact Us Taiwan (Headquarters) Japan GIGA-BYTE TECHNOLOGY CO., LTD. NIPPON GIGA-BYTE CORPORATION Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, WEB address : http://www.gigabyte.co.jp Taiwan. Singapore TEL: +886 (2) 8912-4888 GIGA-BYTE SINGAPORE PTE. LTD. FAX: +886 (2) 8912-4003 Tech. Support : Tech.
  • Page 96 China Australia NINGBO G.B.T. TECH. TRADING CO., LTD. GIGABYTE TECHNOLOGY PTY. LTD. Tech. Support : Tech. Support : http://cn.giga-byte.com/TechSupport/ServiceCenter.htm http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn WEB address : http://www.giga-byte.com.au Shanghai France TEL: +86-021-63410999 GIGABYTE TECHNOLOGY FRANCES S.A.R.L.

Table of Contents