Flow Control; Terminal Type - Gigabyte GA-8IKHXT User Manual

C ACPI Redirection Port
Select the serial port to use for ACPI Headless Console Redirection.
Serial Port A
8
Serial Port B
8
Disabled
8
C Baud Rate
This option allow s user to set the specified baud rate.
Options
8
C Flow Control
Enables Flow Control w hen EMP is dahring the same serial port as console redirection, the flow
control must be set to CTS/RTS or CTS/RTS+CD depending on w hether a modem is used.
None
8
XON/OFF
8
CTS/RTS
8
C Terminal Type
This option allow s user to select the specified console ty pe. This is defined by IEEE. PC-ANSI
is the standard PC-ty pe terminal. Note that for VT100+, y ou must select English as y our
languuage. And VT-UTF8 uses unicode.
Options
8
C Assert NMI on SERR
If thisoption is set to enabled, PCI bus sy stem error (SERR) is enabled and is routed to NMI.
Enabled
8
Disabled
8
Use Serial Port A for
ACPI Headless
Use Serial Port B for
ACPI Headless
Completely disable
ACPI Headless
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Not supported.
Software control.
Hardware control.
vt100+, PC-ANSI, VT-UTF8.
Enable Assert NMI on SERR. (Default)
Disable this function.
51
BIOS Setup
console redirection.
console redirection.
console redirection function.