Table of Contents
Advertisement
CBoot-Time Diagnosic
Display the diagnostic screen during boot..
Display the diagnostic screen during POST.
8 Enabled
8 Disabled
Display the logo on screen during POSt (Default)
CReset Config uration Data
Select ' Yes' if you want to clear the extended system configuration data (ESCD) area.
Clear the extended system configuration data (ESCD) area.
8 Yes
8 No
No clear ESCD area. (Default)
CNumLock
This option allows user to select power-on state for NumLock.
Enable NumLock.
8 On
Disable this function.
8 Off
CMemory Processor Error
When Boot is selected, the system will attempt to boot after a memory or proocessor error
occured.
System attempts to boot if a memory or proocessor error cooured. (Default)
8 Boot
8 Halt
Sy stem w ill stop if an error is detected during pow er up.
CMultiprocessor Specification
This option allows user to configure the multiprocessor(MP) specification revision level. Some
operating system will require 1.1 for compatibility reasons.
1.4
Support MPS Version 1.4 . (Default)
8
1.1
Support M PS Version 1.1.
8
Note: Please Select 1.1 if your install NT4.0 with Prescott CPU.
CSATA RAID Enable
Enable SATA RAID function.
8 Enabled
8 Disabled
Disable this function.
47
BIOS Setup
Advertisement
Table of Contents
