Front Panel Controls And Indicators - Enterasys RoamAbout RBT-8200 Installation Manual

Front Panel Controls and Indicators

Front Panel Controls and Indicators
Figure
Table 1‐1 describes the control button functions and Table
Figure 1-1
Table 1-1 Control Button Functions
Button
Power/Sleep
Reset button
1-2 RBT-8200 Wireless Switch Setup
1‐1 shows the chassis front panel.
Front Panel Controls and Indicators
A/B. NIC 1, NIC 2 LED
C. Power button
D. Power LED
E. Hard drive activity LED
F. Fault LED
G. System ID LED
Function
The Power button toggles the system power on/off. The Sleep button is for ACPI-
compatible systems.
Performs a soft system re-boot.
1‐2 describes the LED status.
H.System ID button
I. Reset button
J.USB port
K.NMI (Non-maskable Interrupt)
L. Console Port Connector