Quick Guide To Alarm System Functions - First Alert FA120C User Manual

QUICK GUIDE TO ALARM SYSTEM FUNCTIONS

FUNCTION PROCEDURE
Check Zones Press READY key.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, INSTANT, MAXIMUM)
Quick Arm Press #. Press arming key desired:
(if programmed) (AWAY, STAY, INSTANT, MAXIMUM)
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code. Press BYPASS key.
(if programmed)
Silence Sounders
Enter code. Press OFF key.
Burglary:
Press OFF key.
Fire:
Press any key.
"Check":
Disarm System Enter code. Press OFF key.
Clear Alarm After disarming, enter code again.
Memory
Press OFF key again.
Duress Enter user code 8 to arm or disarm "normally."
(if connected to
central station)
Panic Alarms Press key [A], [B], or [C] for at least 2 sec., or
(if no A, B, or C on your keypad)
(as programmed)
press keys [1]&[ ], or [ ]&[#], or [3]&[#],
both at same time.
Chime Mode To turn ON or OFF: Enter code. Press CHIME
key.
Test Mode To turn ON: Enter code. Press TEST key.
To turn OFF: Enter code. Press OFF key.
COMMENTS
To view faulted zones when system not ready.
Arms system in mode selected.
Arms system in mode selected, quickly and without use of code.
Bypassed zones are unprotected and will not cause an alarm if violated.
Bypasses all faulted zones automatically.
Also disarms system. Memory of alarm remains until cleared.
Memory of Alarm remains until cleared.
Determine cause. See Page 26.
Also silences sounders. Memory of alarm remains until cleared.
Keypad will beep rapidly upon entry if alarm has occurred.
Alarm display will remain upon disarming until cleared.
Performs desired action and sends silent alarm to central station.
See Page 23 for functions programmed for your system.
Keypad will sound if doors or windows are violated while system is
disarmed and chime mode is ON.
Tests alarm sounder and allows sensors to be tested.
Ð 3 3 Ð