Craftsman 315.115410 Operator's Manual page 4

•
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended could
result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Ensure the switch is in the off position before in-
serting battery pack. Inserting the battery pack into
power tools that have the switch on invitesaccidents.
• Recharge only with the charger specified by the
manufacturer. A chargerthat is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquidejected
from the battery may cause irritationor burns.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is main-
tained.
• When servicing a power tool, use only identical
replacement parts. Follow instructions in the Main-
tenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
WARNING! To reduce the risk of nnlury,user must
read instruction manual.
• Use auxiliary handles supplied with the tool. Lossof
control can cause personal injury.
• Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring. Contact with a "live" wire will
also make exposed metal parts of the tool "live" and
shock the operator.
• Know your power tool. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
• Always wear safety glasses with side shields.
Everydayglasses haveonly impact resistant lenses.
They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
• Protect your lungs, Wear a face or dust mask if the
operation is dusty. Followingthis rule will reducethe
risk of serious personal injury.
• Protect your hearing. Wear hearing protection
during extended periods of operation. Following this
rule will reduce the risk of serious personal injury.
• Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electricshock, fire, or seriouspersonal injury.
• Do not place battery tools or their batteries near
fire or heat. This will reducethe risk of explosion and
possiblyinjury.
• Never use a battery that has been dropped or
received a sharp blow. A damaged battery is subject
to explosion. Properlydispose of a dropped or
damaged batteryimmediately.
• Batteries vent hydrogen gas and can explode in
the presence of a source of ignition, such as a pilot
light. To reducethe risk of seriouspersonal injury,
never use any cordless product in the presence of
open flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
• Do not charge battery tool in a damp or wet
location. Followingthis rule will reducethe risk of
electric shock.
For best results, your battery tool should be
charged in a location where the temperature is
more than 5O°Fbut less than 100°F. Do not store
outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Followingthis rule will
reduce the risk of serious personal injury.
4