Carton Contents; Unpacking Your Miter Saw - Craftsman 137.212540 Operator's Manual

UNPACKING YOUR MITER SAW
To avoid injury from unexpected starting or electrical shock,
do not plug the power cord into a source of power during
unpacking and assembly. This cord must remain
unplugged whenever you are adjusting/assembling the
saw,
Remove the miter saw from the carton.
IMPORTANT: Do not lift the miter saw by the
switch handle or miter table handle. It may cause
misalignment. Lift only by the built in carry handle
on the top of the machine.
,
3.
Place the saw on a secure stationary work
surface.
Separate all parts from the packing material.
Check each one with the illustration below to make
certain all items are accounted for, before
discarding any packing material.
If any part is missing or damaged, do not attempt to
assemble the miter saw, or plug in the power cord until the
missing or damaged part is correctly replaced. To avoid
electric shock, use only identical replacement parts when
servicing double insulated tools.
I tl
Stand Legs
11
Extension Table
Locking Screws
Right Table
Extension
Left Table Extension
Bottom (short)
bracket
Batteries
Miter Table Blade
Handle Wrench
Top (short)
Bottom (long) leg bracket
bracket
Dust Collector
Elbow
Dust Bag
Top (long)
leg bracket
Safety Hold-down
Clamp
Stand Mounting Rubber Foot
Hardware Bag Pad