Product Specifications; Features - Craftsman 315.116060 Operator's Manual

PRODUCTSPECIFICATIONS
Coupler . ........................................................ 1/4
in. Keyless
Motor ............................................................... 19.2 Volt DC
Switch .......................................................... Variable Speed
KNOW YOUR IMPACT DRIVER
See Figure 1, page L
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are at-
tempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
BIT STORAGE
A bit can be placed in the storage area, located on the
base of the tool.
COUPLER
Quickly and easily change bits without the need for tools.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK}
Your impact driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
No Load Speed .................................. 0-2,500 r/min. (RPM)
Impacts Per Minute ......................................... 0-3,500 IPM
Torque ................................................................ 1,500 in.lb.
the direction of rotation selector in the OFF (center lock)
position helps reduce the possibility of accidental starting
when not in use.
IMPACTS PER MINUTE
This tool features an impact speed of 0-3,500 IPM
(Impacts Per Minute).
LED WORKMGHT
The LED worklight, located on the base of the tool, illumi-
nates when the switch trigger is depressed. This provides
extra light for increased visibility.
OVERMOLD HANDLE AND TRIGGER
Ergonomic handle and trigger with overmold improves
comfort and grip.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
A
WARNING: Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LiST
1/4 in. Impact Driver
Operator's Manual
_1_ WARNING: If any parts are damaged or missing do
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
A
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
A
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
7 - English