Introduction; Mounting Template - Motorola SYMBOL LS9203 Reference Manual

Introduction

This chapter covers the techniques involved in scanning bar codes, beeper and LED definitions, and general instructions and tips about
scanning.
Scanning
An omni scan pattern provides rapid, orientation-free scanning. Scanning can be done as either a hands-free or hand-held operation.
To scan a bar code, direct it in toward the window of the scanner ("presentation" scanning, see
to side in a sweeping motion ("swipe" scanning, see
1. Ensure all cable connections are secure.
2. Place the scanner in the stand (see
To mount the detachable stand, see
3. To scan a bar code, present the bar code and ensure the scan lines cross every bar and space of the symbol. See
on page 2-4 for scanning in hands-free mode and
4. Upon successful decode, the scanner beeps and the green LED flashes momentarily.
Figure 2-5 on page 2-5).
Figure 2-1).
Figure 2-1. Scanner in the Stand
Mounting Template on page
Figure 2-3 on page 2-4
Figure 2-4 on page
2-9.
for scanning in hand-held mode.
Scanning 2-3
2-5) or from side
Figure 2-2