Packing List - Craftsman Nextec 320.61199 Operator's Manual

• If any part is damaged or missing, please refer to the numbers listed on the
back page of operator's manual.
PACKING LIST
Multi-Tool, straight edge flush cut blade, circular saw blade, hardened steel scraping
blade, carbide circular adhesive removal blade, carbide triangular rasp, sanding
plate and 24 pcs sandpapers, hex key, vacuum adaptor, operator's manual.
SELECTING THE APPLICATION ACCESSORY
_, WARNING: If any part is broken or missing, do not attempt to plug in the
power cord or operate the tool until the broken or missing part is replaced.
Failure to do so could result in possible serious injury.
ACCESSORY MATERIALS
Carbide Circular Adhesive Grout, Plaster, Porous
Removal Blade Concrete and Masonry
Carbide Triangular Rasp Hardened adhesives,
Thinset, Wood, Masonry
Hardened Steel Scraping Paint & Varnish, Bonded
Blade Carpet, Soft Adhesives, Vinyl
Flooring, wood and other
floor coverings.
Steel High-Speed Circular Wood, Plastic, Drywall, Non-
Saw Blade Ferrous Metals, thin Sheet
Metal and other materials
High Carbide Steel Straight Wood, Plastic, Drywall, Soft
Edge Flush Cut Blade Metals and other Materials
Sanding Plate and Bare or painted wood,
Sandpaper plaster, and other surfaces,
depending on sandpaper grit
LOW-BATTERY CAPACITY INDICATOR
If the LED worklight begins to rapidly and continuously flash when the switch on
the tool is depressed, the battery-pack power has run out, and the battery pack
should be recharged.
Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free
power for their entire run time. The tool will not experience a slow, gradual loss
of power as you work. To signal that the battery pack is at the end of its run time
and needs to be charged, the power to the tool will drop quickly.
NOTE: The LED may also flash due to an overload or high temperature (see
61199 ManuaLRevised_09 0310 Page 14