Craftsman 113.225930 Owner's Manual page 4

additional safety instructions
for belt and disc sander
WARNING: THE 2:1/2" MACHINE PULLEY AND
THE 2" MOTOR PULLEY FURNISHED, WILL
RUN THE DISC AT APPROXIMATELY 2700
RPM AND THE BELT AT APPROXIMATELY
2100 (FEET PER MINUTE) WHEN USED WITH A
3450 RPM MOTOR. NEVER SUBSTITUTE OR
INTERCHANGE THESE PULLEYS TO INCREASE
THIS SPEED BECAUSE IT COULD BE DANGER-
OUS.
WARNING: DO NOT ALLOW FAMILIARITY
(GAINED FROM FREQUENT USE OF YOUR
MACHINE) TO BECOME COMMONPLACE, AL-
WAYS REMEMBER THAT A CARELESS FRAC-
TION OF A SECOND IS SUFFICIENT TO IN-
FLICT SEVERE INJURY.
i ........................... ................. '
WEAR YOUR
The operation of any power too! can result in foreign
objects being thrown into the eyes, which can result in
severe eye damage, Always wear safety goggles complying
with ANSI ZB7.1 (shown on Package) before commencing
power tool operation: Safety Goggles are available at Sears
retail or catalog stores.
H :•