Fan Control - Eurotech APOLLO 1U ICE Technical Manual

APOLLO 1U ICE

Fan control

There are two fans on the APOLLO 1U ICE that can be controlled - the processor/CPU
fan, and the system fan. (The fan in the PSU runs at a predetermined speed.)
You can independently control the fan speed and preset using the BIOS screens. To do
this, follow these steps:
Press F2 during boot up and enter the BIOS setup facility.
1
Use the right arrow key to choose the Advanced menu.
2
Use the down arrow key to highlight Hardware Monitor, and then press Enter.
3
Ensure Fan Speed Control is highlighted, and then press Enter.
4
Highlight the fan you wish to set, and press Enter.
5
Change the fan speed to the desired percentage of its maximum capacity and
6
press Enter.
Exit from the BIOS screens, saving your changes.
7
© 2007 Eurotech Ltd Issue C
Fan control
11