Checking The Digital-Signal Strength; Setting Tv Parental Controls; Setting The Password For The First Time - Insignia NS-LBD32X-10A User Manual

Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
5 Press or to select the channel you want to
delete the label from, then press
Label Clear.
Ch Label
Channel Number
Ch Label
Label Clear
6 Press or ENTER. The label is deleted.
7 Press EXIT to close the menu.

Checking the digital-signal strength

To check the digital-signal strength:
1 Press TV to select TV mode.
2 Press TV MENU. The Main Menu opens.
3 Press or to select Channel, then press
ENTER. The Channel menu opens.
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
to highlight
15.1

Setting TV parental controls

or

Setting the password for the first time

www.insigniaproducts.com
4 Press or to select DTV Signal, then press
or ENTER. The DTV Signal screen opens.
DTV Signal
0
Signal Level
5 Press TV MENU to return to the previous menu,
or press EXIT to close the menu.
Notes
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen disappears
and your TV/Blu-ray combo returns to normal
viewing.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
You can set an age limitation on your
TV/Blu-ray combo to restrict children from viewing
or hearing violent scenes or pictures that you
choose to exclude. The restriction applies to TV
ratings and movie ratings if this data is transmitted.
You may set this restriction separately.
To use the V-chip feature, you must set and use a
password.
Note
Parental controls for discs must be set from the disc
menus. For more information, see "Setting disc
parental controls" on page 44.
To set the password for the first time:
1 Press TV to select TV mode.
2 Press TV MENU. The Main Menu opens.
50 100
27