Combo tv lcd 32"/dvd blu-ray, 1080p insignia (68 pages)
Summary of Contents for Insignia NS-LTDVD20
Page 1
User Guide | Guide de l’utilisateur | Guía del Usuario 20" LCD TV/DVD Combo | Ensemble TV/Lecteur de DVD à écran ACL de 20 po | Combo TV con pantalla LCD/ reproductor de DVD de 20" NS-LTDVD20...
Español ......59 Welcome Congratulations on your purchase of a high-quality Insignia product. Your NS-LTDVD20 represents the state of the art in LCD TV and DVD player design and is designed for reliable and trouble-free performance.
Page 4
Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from your TV combo. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Attachments Do not use attachments not recommended by Insignia because they may cause hazards.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo • If your TV combo does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in...
IR sensor Receives signals from the remote control. Do not block. CH+/CH– Press to change the channel. Volume+/Volume– Press to adjust the volume. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Component MENU INPUT POWER Back PHONES INPUT 2 VIDEO AUDIO HDMI...
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Remote control Component Description Press to turn your TV combo on POWER and off or press to put standby mode. Press to change to TV mode. Press to change to DVD mode. Numbers Press to enter channel numbers, DVD chapter numbers, and CD track numbers.
Page 8
(2). Make sure that the + and – symbols on the batteries match the + and – symbols inside the battery compartment. 3 Replace the battery cover. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Using the remote control To use the remote control: •...
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Setting up your TV combo Connecting an antenna or cable or satellite TV AUDIO AUDIO VIDEO AUDIO COAXIAL INPUT OUTPUT S-VIDEO INPUT 1 To connect an external antenna, cable TV, or satellite TV: 1 Remove the port cover on the back of your TV combo (1).
3 Turn on your TV combo. 4 Press INPUT and the to select Component. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Connecting a Dolby Digital decoder You can connect your TV combo to an amplifier equipped with a Dolby processor to listen to DVD audio in surround sound.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Connecting a DTS decoder You can connect your TV combo to an amplifier equipped with a DTS decoder or processor to listen to DVD audio or audio CDs in DTS sound. AUDIO COAXIAL INPUT...
1 Remove the port cover on the back of your TV combo. 2 Plug a coaxial cable (2) into the amplifier (1) and into COAXIAL OUTPUT jack (3) on the back of your TV combo. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Connecting a computer HDMI AUDIO INPUT...
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Using basic controls Turning your TV combo on and off To turn your TV combo on and off: 1 Press POWER on the side of your TV combo or on the remote control. The POWER/STANDBY indicator turns green.
5 Press to select a channel you want to add to the favorite channel list. Insignia NS-LTDVD20 20" LCD TV/DVD Combo 6 Press ENTER. A checkmark appears, and the channel is marked as a favorite. 7 Repeat this procedure to select the other channels.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo 3 Press to select one of the following settings, then press to change the setting. You can select: • Picture Mode–Standard, Dynamic, Soft, or Personal. • Contrast • Brightness • Sharpness • Tint •...
AUDIO TIME TIME OPTION Time Zone Alaska Daylight Saving Time : SELECT : ADJUST TV MENU : RETURN Insignia NS-LTDVD20 20" LCD TV/DVD Combo TV modes PICTURE AUDIO TIME TIME OPTION Time Zone Daylight Saving Time : SELECT : ADJUST 2 Press to enter the menu.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo 3 Press to select one of the following settings, then press to change the setting. You can select: • Menu Language–English, French, or Spanish. • Transparency–On or Off. • Color Mode–Normal, Warm, or Cool.
(If you have not set a password, enter 9999.) The cursor moves to the New Password column. Insignia NS-LTDVD20 20" LCD TV/DVD Combo 3 Press number buttons to input the new password. The cursor moves to the Confirm Password column.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Setting the RRT rating To set the RRT rating: 1 In the LOCK menu, highlight RRT Rating (digital channels only) or RRT Setting (digital and analog channels), then press the RRT rating menu. LOCK...
Eject the DVD. Using CD repeat play You can repeat tracks or the entire CD using repeat play. Insignia NS-LTDVD20 20" LCD TV/DVD Combo To use repeat play: 1 While the CD is playing, press REPEAT to PLAY select what you want to repeat. You can select: •...
Insignia NS-LTDVD20 20" LCD TV/DVD Combo Searching for a specified time on a DVD To search for a specified time on a DVD: 1 Press T.SEARCH one or more times until the following screen appears. TITLE 06/30 TIME : -:--:-- 2 Use the number buttons to enter the amount of time you want to skip on the DVD.
4 Press to highlight the type of display you want, then press PLAY. • NORMAL/PS Insignia NS-LTDVD20 20" LCD TV/DVD Combo Widescreen images are shown on the screen, but with some parts automatically cut off the sides. • NORMAL/LB Widescreen images are shown on the screen with black bars on the top and bottom of the screen.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo 4 Press to highlight On or Off, then press PLAY. 5 Press one or more times to go back to the previous menu. 6 To close the menu, press to highlight the Exit icon, then press PLAY.
Setting up DVD 3D sound To set up 3D sound: 1 While your TV combo is in DVD mode, press SETUP. Insignia NS-LTDVD20 20" LCD TV/DVD Combo 2 Press to select the Audio press PLAY. The Audio Setup Page opens.
Insignia NS-LTDVD20 20" LCD TV/DVD Combo • PW Mode–Select ON to turn on the password feature. PARENTAL is dim and cannot be selected. Select OFF to turn off the password feature. PARENTAL can be selected. • PASSWORD CHANGE–Select to change the password.
Make sure that the audio output mode is set correctly. Make sure that the audio connection between your TV combo and amplifier (if used) is secure. Insignia NS-LTDVD20 20" LCD TV/DVD Combo Problem Solution Disc cannot be played Make sure that the disc is inserted with the label facing forward.
Insignia brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Table des matières Bienvenue ......29 Informations sur la sécurité...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Informations sur la sécurité ATTENTION RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR Attention Afin de réduire le risque de choc électrique, ne pas enlever le couvercle (ou le panneau arrière). Ne contient aucune pièce réparable par l'utilisateur.
Page 33
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Support Ne pas placer cet appareil sur une table roulante, un pied, un trépied, un support ou une table instables. L’appareil pourrait dans sa chute blesser gravement des personnes et être fortement endommagé.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po L’antenne externe ne doit pas être située près de lignes électriques aériennes ou d’autres circuits d’alimentation et électriques, ni à un emplacement où elle pourrait tomber sur de tels circuits ou lignes électriques.
Nº Éléments Description Volume+/Volume– Permet de régler le volume. MENU Permet d’afficher le menu ENTRÉE Touche de sélection du signal d’entrée audio-vidéo. Il est possible de sélectionner TV, AV1, AV2, S-Vidéo, composantes, DVD, HDMI, ou VGA. MARCHE/ARRÊT Permet de mettre l’appareil sous et hors tension ou de le mettre en mode attente.
Page 36
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Nº Éléments Description SOUS-TITRES En mode TV, permet de CODÉS sélectionner le mode de sous-titres codés. MENU TV Permet d’afficher le menu TV. Appuyer sur ces touches pour parcourir les menus d’écran.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Utilisation de la télécommande Pour utiliser la télécommande : • Pointer directement la télécommande sur l’appareil, selon un angle de 30° avec le capteur de télécommande à l'avant de l'appareil et à...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Connexion d’un périphérique vidéo standard Remarque L’appareil peut accepter de multiples sources d'entrée vidéo. Pour des connexions vidéo temporaires ou à accès facile, utiliser les prises latérales (AV2). Pour des connexions plus permanentes, utiliser les prises arrière (AV1).
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Allumer l’appareil. 4 Appuyer sur INPUT (Entrée) et sélectionner Component (Composantes). Connexion d'un décodeur Dolby Digital Il est possible de connecter l’appareil à un amplificateur équipé d'un processeur ou décodeur Dolby...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Connexion d'un décodeur audio MPEG Il est possible de connecter l’appareil à un amplificateur équipé d'un processeur ou décodeur MPEG pour écouter des DVD en son MPEG2. AUDIO...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Connexion à un ordinateur HDMI AUDIO V G A INPUT PC INPUT PC INPUT Pour connecter l’appareil à un ordinateur : 1 Retirer le cache de la prise (1) au dos de l’appareil.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Appuyer sur pour sélectionner Antenna (Antenne), puis sur sélectionner Air (Hertzien) ou CATV (Câblodistribution). • Air (Hertzien) – Canaux VHF/UHF. • CATV (Câblodistribution) – Canaux de TV câblée.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Affichage des informations relatives à un canal Pour afficher les informations relatives à un canal : 1 En mode TV numérique, sélectionner le canal souhaité. 2 Appuyer une fois sur DISPLAY (Affichage) pour afficher les informations relatives au canal sélectionné.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Appuyer sur pour sélectionner un des paramètres suivants, puis sur pour changer le paramètre. Il est possible de sélectionner : • Picture Mode (Mode Image) – Standard, Dynamic (Dynamique), Soft (Doux) ou Personal (Personnel).
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Appuyer sur pour sélectionner un des paramètres suivants, puis sur pour changer le paramètre. Il est possible de sélectionner : • Antenna (Antenne) – Air (Hertzien) ou CATV (Câblodistribution).
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Réglage d'autres paramètres Pour régler d'autres paramètres : 1 Appuyer sur TV MENU (Menu TV), puis sur pour mettre en surbrillance l'icône OPTION. Le menu OPTION s’affiche. Mode PC...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Paramétrage du style des sous-titres codés Pour paramétrer le style des sous-titres codés : 1 Appuyer sur pour sélectionner Option, puis appuyer sur . Mode TV OPTION PICTURE...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po • US (États-Unis) – Pour de plus amples informations, voir « Interdiction d'émissions de TV selon la classification des États-Unis », à la page 46. • RRT Setting (Réglage RRT) – Pour de plus amples informations, voir «...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Paramétrage de la classification RRT Pour paramétrer la classification RRT : 1 Dans le menu LOCK (Verrouillage), mettre en surbrillance RRT Rating (Classification RRT) (canaux numériques uniquement) ou RRT Setting (Réglage RRT) (canaux...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Utilisation des menus d’écran Utiliser la télécommande pour naviguer dans les menus d’écran. Pour utiliser les menus d’écran : 1 Appuyer sur la touche INPUT (Entrée) de la télécommande pour sélectionner la source...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 2 Pour arrêter la lecture en boucle, effectuer l’une des opérations suivantes : • Appuyer sur REPEAT (Répétition) jusqu'à ce que ALL (Tout) disparaisse. • Appuyer deux fois sur STOP.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 2 Si plusieurs langues audio sont disponibles, appuyer de nouveau sur AUDIO pour sélectionner la langue audio suivante. AUDIO 1/2:AC-3 5.1CH AUDIO 2/2:AC-3 5.1CH Remarque Cette fonction n’est disponible que si le DVD a été...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po • NORMAL/PS L’écran affiche les images panoramiques, mais elles sont tronquées automatiquement sur les côtés. • NORMAL/LB L’écran permet l’affichage d’images panoramiques, avec une bande noire en haut et en bas de l’écran.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Appuyer sur pour mettre en surbrillance Speaker Setup (Configuration des haut-parleurs), puis sur PLAY. La page de configuration des haut-parleurs ( Speaker Setup Page ) s’ouvre. -- Speaker Setup Page --...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po 3 Mettre en surbrillance Channell Equalizer (Égalisateur du canal 1), puis appuyer sur PLAY. La page Égalisateur de canal ( Channel Equalizer Page ) s’affiche à l’écran. 4 Appuyer sur pour mettre en surbrillance EQ TYPE (Type d'égalisateur),...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po • PW Mode (Mode mot de passe) – Sélectionner ON pour activer la fonctionnalité du mot de passe. PARENTAL (Contrôle parental) est en grisé et ne peut pas être sélectionné.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Pour nettoyer un disque : • À l'aide d'un chiffon doux, essuyer le disque à partir du centre vers la périphérie. Attention Ne pas utiliser de détergent, ni d'agents de nettoyage abrasifs.
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Alimentatio Entrée 100 à 240 V CA, 50/60 Hz Consommation (Max.) 75 W Sortie 3 W + 3 W Bornes Entrée A/V Vidéo, S-Vidéo, Audio Composantes Y, Pb (Cb), Pr (Cr) Entrée PC...
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po Garantie limitée d’un an Insignia Products (“Insignia”) garantit au premier acheteur de ce NS-LTDVD20 neuf (“Produit”), qu’il est exempt de vices de fabrication et de main-d’œuvre à l’origine, pour une période d’un (1) an à...
Page 60
Insignia NS-LTDVD20 Ensemble TV/Lecteur de DVD à écran ACL de 20 po www.insignia-products.com...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Contenido Bienvenido ......59 Información de seguridad .
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Información de seguridad CUIDADO RIESGO DE CHOQUE ELÉCTRICO NO ABRIR Advertencia Para reducir el riesgo de choque eléctrico, no retire la cubierta ni la parte posterior. No hay partes reparables por el usuario en el interior.
Page 63
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Soporte No coloque su combo TV en un carro, base, trípode, soporte o mesa inestable. El combo TV se podría caer y sufrir daños importantes, además de causar serias lesiones personales.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Conexión a tierra de la antena exterior Sí hay conectada una antena exterior o un sistema de cable al combo TV, asegúrese de que la antena o el sistema de cable esté...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" N.º Componente Descripción MENÚ Presione para abrir el menú de TV. ENTRADA Presione para seleccionar la entrada de la señal de AV. Puede seleccionar TV, AV1, AV2, S-Video, Component (vídeo de...
Page 66
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" N.º Componente Descripción Presione para seleccionar el modo de subtítulos optativos mientras está en el modo de TV. MENÚ TV Presione para abrir el menú de TV. Presione para navegar por los menús de la pantalla.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" 2 Inserte dos pilas AAA en el compartimiento de pilas (2). Verifique que los símbolos + y – en las pilas coincidan con los símbolos + y –...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Conexión de un dispositivo de video estándar Nota Su TV admite múltiples entradas de fuentes de video. Para conexiones de video temporales y de fácil acceso, use los conectores laterales (AV2).
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Para conectar una fuente de barrido progresivo o video HDTV a los tomas Y/Pb/Pr: 1 Enchufe un cable de video de componentes (2) en un dispositivo de video de barrido...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Conexión de un decodificador de audio MPEG Puede conectar su combo TV a un amplificador equipado con un decodificador o procesador MPEG para escuchar discos DVD en sonido MPEG2.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Conexión de un PC HDMI AUDIO V G A INPUT PC INPUT PC INPUT Para conectar un PC: 1 Retire la cubierta de los puertos (1) en la parte posterior de su combo TV.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" 3 Presione para seleccionar Antenna (Antena) y luego presione seleccionar Air (Aire) o CATV. • Air – canales VHF/UHF. • CATV – Canales de TV por cable. 4 Presione TV MENU una o más veces para cerrar el menú.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" 3 Presione DISPLAY dos veces para ver la información del contenido del programa (si está disponible). 14.1 704x480 AUDIO 1/1(L+R) BART-TV 2005/05/20 08:00 08:00-12:00 No Event Information 4 Presione DISPLAY una o más veces para cerrar el menú...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Ajuste del sonido Para ajustar el sonido: 1 Presione TV MENU (Menú de TV), después presione para resaltar el icono AUDIO (Audio). Aparece el menú AUDIO . Modo PC...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" 3 Presione para seleccionar uno de los ajustes y luego presione para cambiar su valor. Se puede seleccionar: • Antenna (Antena) – Air (Aire) o CATV. • Auto Scan (Barrido automático) – Para obtener más información, consulte...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Otros ajustes Para ajustar otros parámetros: 1 Presione TV MENU (Menú de TV), después presione para resaltar el icono OPTION (Opciones). Aparece el menú OPTION . Modo PC...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Modo TV OPTION PICTURE AUDIO TIME OPTION LOCK CHANNEL Font Style Default Font Size Normal Font Edge Style None Font Edge Color Green FG Color Default BG Color...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Cambio de la contraseña Para cambiar la contraseña: 1 En el menú LOCK (Bloqueo), resalte Change Password (Cambiar contraseña) y luego presione para abrir el menú para cambiar la contraseña.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Formato Resolución Frec. (Hz) WXGA 1280 × 768 1360 × 768 Si su PC utiliza una resolución de video distinta a las de la lista anterior, su combo TV mostrará...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" 5 Presione STOP para detener la reproducción para hacer una pausa. 6 Presione OPEN/CLOSE (Abrir/Cerrar) para sacar el CD. Selección de una pista Para seleccionar una pista específica para reproducir: •...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Búsqueda de una hora determinada en una pista de un CD Para buscar una hora determinada en una pista de un CD: 1 Presione el botón numérico de la pista que desea escuchar.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Cambio del modo de visualización del Para cambiar el modo de visualización de su combo TV: 1 Mientras su combo TV está en modo DVD, presione SETUP (Configuración). Se resalta el icono General Setup (Configuración...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Uso de la memoria de la última posición del DVD Su combo TV puede recordar dónde se detuvo la reproducción del DVD cuando se apagó el televisor. Cuando se enciende el combo TV y se inicia la reproducción del DVD, ésta se...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" • D.R.C – Esta opción se selecciona para ajustar la velocidad de compresión lineal a fin de obtener distintos resultados de compresión de las señales. 5 Presione para cambiar la configuración y luego presione...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Configuración de una contraseña de los padres en un DVD Para configurar o cambiar una contraseña: 1 En modo DVD, presione SETUP (Configuración) en el control remoto, seleccione el icono Password Setup (Configuración de la contraseña) y luego...
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Mantenimiento Limpieza del gabinete Limpie el panel frontal y otras superficies exteriores del combo TV con un paño suave ligeramente humedecido con agua templada. No utilice nunca un disolvente o alcohol para limpiar el combo TV.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Problema Solución El disco no se puede Asegúrese de que el disco se ha reproducir insertado con la etiqueta hacia delante. Limpie el disco. Humedad se ha condensado en la unidad.
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" Garantía Limitada de 1 Año Insignia Products (“Insignia”) le garantiza a usted, el comprador original de este nuevoNS-LTDVD20 (“Producto”), que éste se encontrará libre de defectos de material o de mano de obra en su fabricación original por un periodo de un...
Page 90
Insignia NS-LTDVD20 Combo TV con pantalla LCD/ reproductor de DVD de 20" www.insignia-products.com...