Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-LBD32X-10A User Manual

# Button Description
Press to advance one frame at a time on a Blu-ray Disc
39
STEP
or DVD. Press PLAY to resume normal playback.
Press to fast-forward on a Blu-ray Disc, DVD, or CD.
40
SEARCH
Press to go to the next chapter on a Blu-ray Disc or DVD
41
SKIP
or to the next track on a CD.
Press to stop disc playback.
42
STOP

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AA batteries (included) into the
battery compartment. Make sure that the +
and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Make sure that you match the + and – symbols
on the batteries with the symbols in the battery
compartment.
• Do not mix different types of batteries or old
and new batteries.
• If you do not intend to use the remote control
for a extended period of time, remove the
batteries to prevent leakage.
• Do not try to recharge non-rechargable
batteries. They may overheat and rupture.
8
NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p

Aiming the remote control

To use the remote control:
Point the remote control directly at your TV, within
a 60° angle horizontally (30° to either side) and
within 30° vertically of the remote control sensor on
the front of your TV, and within 15 feet (4.6 meters)
of your TV.
Caution
Notes
www.insigniaproducts.com
Do not expose the remote control to liquids, direct
sunlight, or shock.
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or other strong
light is shining at the remote control sensor. In
this case, change the angle of the lighting, move
your TV, or operate the remote control closer to
the remote control sensor.
15 feet
(4.6 meters)