CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases.
Important safety 15 The mains plug is the disconnecting device. The plug must remain readily operable. instructions 16 The apparatus with grounding-type plug is a class I apparatus. Class I apparatus need to be connected to earth ground wire to prevent possible electric shock.
Power source Note to CATV system installer Operate your TV only from the type of power source Article 820 of the National Electrical Code, indicated on the marking label. If you are not sure ANSI/NFPA No. 40 provides guidance for correct of the type of power supplied to your home, consult grounding.
Installing the stand or a 4 Secure the stand with the four provided screws. wall-mount bracket Installing the stand If you plan to use your TV/DVD combo in an upright position on a flat surface, you need to install the stand.
TV components Front Package contents • TV/DVD combo • Stand • Remote control with holder • Remote control batteries (2 AAA) • Screws for attaching the stand or a wall-mount bracket (4) • Antenna • VGA cable • Component video cable MENU •...
Back Jack Description S-VIDEO INPUT (S-VIDEO Connect an S-Video device to these jacks. For more and L/R AUDIO) information, see “Connecting an S-Video device” on page 11. AUDIO L/R OUTPUT Connect an analog audio device to these jacks to VIDEO VGA INPUT INPUT ANT.
Remote Control Button Description Press to turn closed captioning on or off. For more information about closed captioning, see “Selecting the closed captioning mode” on page 29 and “Setting closed captioning styles” on page 29. TV MENU Press to open the on-screen menu. INPUT Press to select options and to adjust settings in the on-screen menus.
Using the remote control Aiming the remote control To use the remote control: Installing remote control batteries • Point the remote control towards the remote sensor on the front of your TV/DVD combo. To install remote control batteries: 1 Remove the battery compartment cover. 30°...
Making connections Programming a universal remote control to work with your TV You can operate your Insignia TV with a new or Connecting the power cord existing universal remote control. To connect the power cord: To program a universal remote control: •...
Connecting a standard video device To connect a standard video device to the side jacks: You can connect a standard video device to the 1 Make sure that your TV/DVD combo is turned AV1 INPUT (VIDEO and L/R AUDIO) jacks on the off and the power cord is disconnected.
Connecting an S-Video device Connecting a component video device To connect an S-Video device: To connect a component video device: 1 Make sure that your TV/DVD combo is turned 1 Make sure that your TV/DVD combo is turned off and the power cord is disconnected. off and the power cord is disconnected.
Connecting an HDMI device Connecting a DVI device To connect an HDMI device: To connect a DVI device: 1 Make sure that your TV/DVD combo is turned 1 Make sure that your TV/DVD combo is turned off and the power cord is disconnected. off and the power cord is disconnected.
Connecting a computer Connecting a computer using HDMI or DVI Note Note • If you are conncting a computer with an HDMI You can also connect a computer using an HDMI connection. For more information, see “Connecting a jack, use an HDMI cable. An HDMI cable computer using HDMI or DVI”...
5 Press INPUT on the remote control or the side of Connecting a digital sound system your TV to display the input source menu, then press INPUT repeatedly or press to select To connect a digital sound system: HDMI1 or HDMI2. Press OK/ENTER. 1 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.
Turning on your TV for the Connecting a TV You can connect a TV to your TV/DVD combo to first time view playback from the built-in DVD player on the connected TV. To connect a TV: The first time you turn on your TV/DVD combo, the Setup Wizard opens.
5 Press OK/ENTER. Your TV/DVD combo scans for Selecting a channel channels, if necessary. To select a channel: • To go to the next or previous channel in the Choose your TV source channel list, press CH and CH . Pressing one of these buttons skips any channels that are Antenna Digital Channels...
Adjusting the picture Adjusting advanced video settings To adjust advanced video settings: Adjusting the picture 1 On the Picture menu, press to highlight Advanced Video, then press to open the To adjust the picture: Advanced Video menu. One of the following menus opens: 1 Press TV MENU, then press to highlight...
Adjusting VGA settings Changing the PC’s video resolution To adjust VGA settings: To change the PC’s video resolution: 1 Press TV MENU, then press to highlight 1 Click Start, Control Panel, then double-click the Settings icon. The Settings menu appears. Display.
Adjusting the sound 5 Press EXIT to close the menu. Note • If you adjust Treble, Bass, or Balance, your Adjusting the sound TV/DVD combo automatically changes the Sound Mode to Custom. To adjust the sound: • The Audio Only function becomes active about 1 Press TV MENU, then press to highlight 10 seconds after the TV menu closes.
3 Press to highlight Auto Channel Search, 4 Press to highlight Antenna or Cable. then press or . The Auto Search menu opens. 5 Press TV MENU one or more times to return to the previous menu. 6 Press EXIT to close the menu. Picture Audio Channel...
Setting up the favorite channel list 6 Press TV MENU one or more times to return to the previous menu. You can create a favorite channel list to make it 7 Press EXIT to close the menu. easier to tune to your favorite channels. Note To set up the favorite channel list: Channels that were skipped when you scanned for...
Deleting a channel from the favorite channel Adding a channel label list You can add a label to a channel to make it easier to identify. To delete a channel from the favorite channel list: To add a channel label: 1 Press TV MENU, then press to highlight 1 Press TV MENU, then press...
Setting parental controls Checking the digital channel strength To check the digital channel strength: 1 Press TV MENU, then press to highlight Turning parental controls on or off the Channel icon. The Channel menu appears. To turn parental controls on and off: 1 Press TV MENU, then press to highlight the Settings icon.
6 Press TV MENU one or more times to return to 6 Press to highlight Input Block, then the previous menu. press to open the Input Block menu. 7 Press EXIT to close the menu. Blocking a video input source Picture Audio Channel...
Page 31
To block U.S. TV programs: 6 Press to highlight US Ratings, then press to open the US Ratings menu. 1 Press TV MENU, then press to highlight the Settings icon. The Settings menu appears. Picture Audio Channel Settings Settings • Parental Controls • US Ratings Picture Audio Channel...
Blocking movies 4 Press the number buttons to enter the password. The default password is 0000. The Movie ratings Parental Controls menu opens. Rating Description General audiences. Picture Audio Channel Settings Parental guidance suggested. Some Settings • Parental Controls material may not be suitable for Change Password System Lock children.
9 Press TV MENU one or more times to return to 3 Press to highlight Parental Controls, the previous menu. then press or . The Enter Password screen opens. 10 Press EXIT to close the menu. Note If the System Lock is not set to On, the ratings you Picture Audio Channel...
7 Press to highlight Canadian English or Changing the password Canadian French, then press to open the Canadian English or Canadian French menu. To change the password: 1 Press TV MENU, then press to highlight Canadian English the Settings icon. The Settings menu appears. Picture Audio Channel...
5 Press to highlight Change Password, 4 Press to highlight a setting, then press then press to open the Change Password to adjust the setting or open a settings screen. menu. If another menu opens, press to adjust the setting. You can select: •...
4 Press to highlight Option, then press 2 Press to access the Settings menu. to open the Option menu. 3 Press to highlight Time, then press to open the Time Settings menu. Picture Audio Channel Settings Settings • Closed Caption • Option Picture Audio Channel...
Manually setting the current date and time 7 Press TV MENU one or more times to return to the previous menu. You can manually set the current date and time. 8 Press EXIT to close the menu. To manually set the current date and time: Setting the sleep timer 1 Press TV MENU, then press to highlight...
6 Press TV MENU one or more times to return to 5 Press to highlight a setting, then press the previous menu. to open a setting menu. You can select: 7 Press EXIT to close the menu. • Year—Press to set the year. •...
Using the DVD player Changing video input labels You can change the video input labels to make them easier to identify. The labels appear when you Playing a DVD press INPUT to select the video input source. To play a DVD: To change the video input labels: 1 Press POWER to turn on your...
4 During playback: Using a DVD title menu If a DVD has two or more titles and the DVD has a • Press (play/pause) to pause playback. title menu, you can use the menu to select the title • Press STOP to stop playback.
Using a DVD menu Turning DVD captions on or off If a DVD has a menu, you can use the menu to select To turn DVD captions on or off: features such as the subtitle or audio language. 1 While your TV/DVD combo is in DVD mode, press SETUP.
Changing the DVD display mode 4 Press to highlight the display mode you want, then press OK/ENTER. You can select: To change the DVD display mode: NORMAL/PS 1 While your TV/DVD combo is in DVD mode, Widescreen images are shown on the screen press SETUP.
Setting up the TV output Turning the screen saver on and off To set up the TV output: To turn the screen saver on and off: 1 While your TV/DVD combo is in DVD mode, 1 While your TV/DVD combo is in DVD mode, press SETUP.
Using DVD last memory Setting up DVD speaker output Your DVD/TV combo can remember where a DVD To set up DVD speaker output: stops playing when you turn off your 1 While your TV/DVD combo is in DVD mode, TV/DVD combo. When you turn on your press SETUP.
6 Press one or more times to go back to the 4 Press to highlight DUAL MONO or previous menu. D.R.C., then press OK/ENTER. 7 To close the menu, press to highlight the • DUAL MONO—Output mode for the left and icon, then press OK/ENTER.
3 Press to highlight CHANNEL 3 Press to highlight 3D PROCESSING, then EQUALIZER, then press OK/ENTER. The press OK/ENTER. The 3D PROCESSING PAGE CHANNEL EQUALIZER PAGE opens. opens. 4 Press to highlight EQ TYPE, then press OK/ENTER. 5 Press to highlight an equalizer pattern, then press OK/ENTER.
Setting up DVD video options Using parental controls To set up DVD video options: To use parental controls: 1 While your TV/DVD combo is in DVD mode, 1 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted. press SETUP.
Changing DVD preferences 4 Press to highlight an option, then press OK/ENTER. You can select: You can change preferences only when the DVD • AUDIO—Changes the DVD audio language. If player is in stop mode. the language you select is available on the To change DVD preferences: DVD, the audio is played in that language.
Maintaining Problem Solution The picture has • Make sure that the antenna is installed correctly. If overlapped images not, adjust the antenna towards the broadcasting Cleaning the cabinet station. Wipe the front panel and other exterior surfaces of Picture has snow •...
Specifications Legal notices • Design and specifications are subject to change FCC Part 15 without notice. This device complies with Part 15 of the FCC Rules. Operation of • Weight and dimensions shown are approximate this product is subject to the following two conditions: (1) this values only.