Table of Contents
Advertisement
LAN
Connecting LAN
CAUTION
Do not connect the telephone cable to the LAN port.
1
Turn off the computer.
Do not use sleep
2
Open the cover, and connect the cable.
Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN
cable.
3
Turn on the computer.
Power On by LAN/Wake Up from Wired LAN
NOTE
With this function enabled, power is consumed even if the computer is in sleep
to use the AC adaptor.
Even when a password is set in the Setup Utility and [Password On Boot] or [Password On Resume] is set to
[Enabled], entering the password is unnecessary for turning on or resuming the computer.
Connect the AC adaptor.
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for 4 seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
The screen remains dark when the computer resumes from sleep
you touch the keyboard, touch pad or touchscreen (only for model with touchscreen). Do not touch the dual touch
(only for model with dual touch).
*1
Windows XP: standby
*1
or hibernation.
*1
, hibernation, or powered off. Be sure
*1
. The previous screen display will be restored when
88
Advertisement
Table of Contents
