Table of Contents
Advertisement
Camera
NOTE
Make sure the image resolution is within the range of the display resolution of this computer (Refer to "Specifications -
Display Method" in OPERATING INSTRUCTIONS).
If you set [Output Size], the [Frame Rate] is automatically determined.
The setting items depend on the device, some items cannot be selected.
Assigning the Light/Zoom In/Take Photo Functions to the Tablet Button
You can assign the Light/Zoom In/Take Photo functions to the Input Panel (
1
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Set tablet buttons to perform
certain tasks].
Click [start] - [All Programs] - [Panasonic] - [Tablet Buttons Settings].
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings] -
[Tablet Buttons].
2
Click the name of the tablet button and click [Change].
3
Select [Start a program] in [Press].
4
Input the following in [Program location].
<When assigning the "Switch the light on and off" function>
c:\program files(x86)\panasonic\PCam\pcam.exe /light
<When assigning the "Zoom in" function>
c:\program files(x86)\panasonic\PCam\pcam.exe /zoom_in
<When assigning the "Take photo" function>
c:\program files(x86)\panasonic\PCam\pcam.exe /shutter
<When assigning the "Take photo" function by specifying the file name>
c:\program files(x86)\panasonic\PCam\pcam.exe /shutter_name
5
Click [OK] - [OK].
( page
( page
78)
( page
78)
)/Enter (
)/Rotation (
77)
( page
79)
83
) buttons.
Advertisement
Table of Contents
