Table of Contents
Advertisement
Hard Disk Backup/Restore Function
NOTE
If pressing F8 does not display [System Recovery Options], use the Product Recovery DVD-ROM for Windows 7.
Turn off the computer and connect the CD/DVD drive to the USB port (
A
Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
B
• The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
Write down all of the contents of the Setup Utility and press F9.
C
• At the confirmation message, select [Yes] and press Enter.
Press F10.
D
• At the confirmation message, select [Yes] and press Enter.
• The computer will restart.
Press F2 or Del while [Panasonic] boot screen is displayed.
E
• The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
Set the Product Recovery DVD-ROM for Windows 7 into the CD/DVD drive.
F
Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
G
Press Enter.
H
• The computer will restart.
Click [Run "System Recovery Options"] and click [Next].
I
Follow the on-screen instructions.
J
123
page
60).
Advertisement
Table of Contents
