Table of Contents
Advertisement
RAM Module
4
Insert/Remove the RAM module.
To insert
Tilt the module slightly and insert it in the slot.
A
Press down the module so that the right and left hooks (C) are locked.
B
To remove
Carefully open the right and left hooks (C).
A
The module will rise.
Carefully remove the module from the slot.
B
5
Set the cover and battery pack.
CAUTION
Set the cover and battery pack correctly so that they do not fall when you carry the computer.
NOTE
If it is hard to insert or to press down the RAM module, do not try forcibly but check the module's direction.
Use the appropriate screw driver so as not to strip the thread of screw.
If the RAM module is recognized correctly, the total size of the RAM module memory is displayed on the [Information]
menu of the Setup Utility (
If the RAM module is not recognized, power off the computer and insert it again.
page
106).
52
Advertisement
Table of Contents
