Table of Contents
Advertisement
Troubleshooting (Advanced)
Smart Card (only for model with Smart Card slot)
Cannot use a Smart Card.
Fingerprint Reader (only for model with Fingerprint Reader)
The sensor does not enroll or authenti-
cate my fingerprint.
Insert the Smart Card correctly.
Set [Smart Card] to [Enabled] in the [Advanced] menu of the Setup Utility
(
page
111).
To use a Smart Card, you need a specified software and driver.
Slide your finger correctly. For further information about enrollment and
authentication, refer to "How to Use the Fingerprint Reader" (
[Fingerprint Tutorial].
*6
• Click
(Start)
- [All Programs] - [Protector Suite] - [Control Center] - [Help]
- [Tutorial].
The sensor enrolls or authenticates no fingerprint, or performs authentication
poorly, despite the correct way of finger sliding when your finger is in any of the
conditions stated below:
• Rough skin, or injured finger (with a cut or a skin inflammation)
• Extremely dry
• Soiled with mud or oil
• Fingerprint has been worn and has faded
• Wet with water or sweat
<You can improve enrolling and authentication sensitivity by taking the
following steps when any of the conditions described above exists>
• Wash your hands or wipe them dry.
• Use a different finger for registration or authentication.
• Treat your finger with a hand cream when it is rough skin or dry.
Clean the fingerprint sensor. For further information, refer to "Handling &
Maintenance" (
page
70).
The fingerprint sensor may be malfunctioning when it continues to perform
poorly after the steps described above have been performed. Contact
Panasonic Technical Support.
138
page
63) and
Advertisement
Table of Contents
