Wish Session Status - EnGenius ESR-9710 User Manual

Wireless n gigabit router
Hide thumbs Also See for EnGenius ESR-9710:
Table of Contents

Advertisement

ESR-9710 Wireless N Gigabit Router

6.5.4 WISH Session Status

Click on the WISH Sessions link in the navigation drop-down menu. The WISH
Sessions page displays full details of active local wireless sessions through your
router when WISH has been enabled. A WISH session is a conversation between a
program or application on a wirelessly connected LAN-side computer and another
computer, however connected.
Originator: The IP address and, where appropriate, port number of the computer
that originated a network connection.
Target: The IP address and, where appropriate, port number of the computer to
which a network connection has been made.
Protocol: The communications protocol used for the conversation.
State: State for sessions that use the TCP protocol.
NO: None -- This entry is used as a placeholder for a future connection that
o
may occur.
SS: SYN Sent -- One of the systems is attempting to start a connection.
o
EST: Established -- the connection is passing data.
o
FW: FIN Wait -- The client system has requested that the connection be
o
stopped.
CW: Close Wait -- the server system has requested that the connection be
o
stopped.
TW: Time Wait -- Waiting for a short time while a connection that was in FIN
o
Wait is fully closed.
LA: Last ACK -- Waiting for a short time while a connection that was in Close
o
Wait is fully closed.
CL: Closed -- The connection is no longer active but the session is being
o
tracked in case there are any retransmitted packets still pending.
Priority: The priority given to packets sent wirelessly over this conversation by the
WISH logic. The priorities are:
BK: Background (least urgent).
o
BE: Best Effort.
o
VI: Video.
o
VO: Voice (most urgent).
o
Time Out: The number of seconds of idle time until the router considers the session
terminated. The initial value of Time Out depends on the type and state of the
connection.
300 seconds - UDP connections.
o
240 seconds - Reset or closed TCP connections. The connection does not
o
close instantly so that lingering packets can pass or the connection can be
re-established.
7800 seconds - Established or closing TCP connections.
o
Version 1.0
75

Advertisement

Table of Contents
loading

Table of Contents