Understanding The Hardware; Hardware Installation; Ip Address Configuration - EnGenius ESR-9710 User Manual

Wireless n gigabit router

Hide thumbs Also See for EnGenius ESR-9710:

Table of Contents

ESR-9710 Wireless N Gigabit Router

2 Understanding the Hardware

1. Place the unit in an appropriate location after conducting a site survey.

2. Plug one end of the Ethernet cable into the LAN port of the device and another end

into your PC/Notebook.

3. Plug one end of another Ethernet cable to WAN port of the device and the other end

into you cable/DSL modem (Internet)

4. Insert the DC-inlet of the power adapter into the port labeled "DC-IN" and the other

end into the power socket on the wall.

This diagram depicts the hardware configuration

This device can be configured as a Bridge/Router or Access Point. The default IP

address of the device is 192.168.1.2 In order to log into this device, you must first

configure the TCP/IP settings of your PC/Notebook.

1. In the control panel, double click Network Connections and then double click on the

connection of your Network Interface Card (NIC). You will then see the following

screen.

Ethernet

WLAN Router

Power Outlet

Ethernet

AC/DC cable

Version 1.0

Cable / DSL

Modem

Table of Contents