Using The Push Button - EnGenius ESR-9710 User Manual

Wireless n gigabit router

Hide thumbs Also See for EnGenius ESR-9710:

Table of Contents

ESR-9710 Wireless N Gigabit Router

Version 1.0

Select the PIN radio button and then click on the Next button.

Specify the PIN and then click on the Connect button.

The wireless device configuration is now complete.

4.2.2 Using the Push Button

WPS is used for WiFi Protected Setup. By pressing the WPS button on the front

panel of the device, the security settings of the device will automatically synchronize

with other wireless devices on your network that support Wi-Fi Protected Setup

If the device supports Wi-Fi Protected Setup and has a configuration button, you can

add it to the network by pressing the configuration button on the device and then the

on the router within 60 seconds. The status LED on the router will flash three times if

the device has been successfully added to the network.

Select the Push Button radio button and then click on the Next button.

Press the WPS button on the device (which is located on the left side of the front

panel) and then click on the Next button.

Table of Contents