Escort PASSPORT SC55 Owner's Manual page 9

How to use Preferences
There are 10 user-selectable Preferences
so you can customize your SC55 for your
specific driving needs. The buttons
labeled "V/M" and "CRU" are used to enter
Preferences, REVIEW your current
settings, and to CHANGE any settings as
desired. The word "PREF" is located on
the top of the SC55, and is highlighted in
graphics. Pages 16-18 explain each option
in more detail.
How to use Preferences
1 To enter Preferences, press and hold
the "V/M" and "CRU" buttons down for 2
seconds. The unit will beep twice, and will
Prefs
display the word .
2 Press the "V/M" button to review the
current settings. You can either tap the
button to change from item to item, or hold
the button to scroll through the items.
3 Press the "CRU" button to change
any setting. You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options.
4 To exit Preferences, simply wait 8
seconds without pressing any button, or
press the power button . The unit will
display Complete , and return to normal
operation.
An example
Here is how you would change PASSPORT's
Pilot option:
1 Enter Preferences by holding both the
"V/M" and "CRU" buttons down for 2
seconds. PASSPORT will beep twice and
Prefs
display .
2
Then hold the "RVW" button down.
PASSPORT will scroll through the categories,
Pilot
starting with Pilot ( ).
3 Release the "RVW" button when
PASSPORT displays the Pilot item. Since the
factory setting for Pilot is Speed and Compass,
Spd Comp
PASSPORT will display .
NOTE: If you accidentally don't release
the "RVW" button in time, and PASSPORT goes
to the next category, simply hold the "RVW"
button down again. Once you're back to your
desired category, release the "RVW" button.
4 Press the "CHG" button to change from
Spd Comp Compass
to .
5 To exit Preferences, simply wait 8
seconds without pressing any buttons, or
press the power button . PASSPORT will
beep and return to normal operation.
14
Overview of Preferences
Press the V/M button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
AUTOPOWER
UNITS
VOICE
BRIGHTNESS
MARKERS
*
Restoring the
Factory Default
Settings
To restore your
PASSPORT to its
OVER SPEED ALERT
original factory
settings, press and
hold the "V/M" and
DETECTOR BRAND
"CRU" buttons while
turning the power
Reset
on. A
AUTOMUTE
message will be
displayed,
accompanied by an
METER Same options for your detector brand
audible alert,
acknowledging the
reset.
Press the MRK button
to change your setting
within a category
Pilot Spd Comp * Speed and Compass
Pilot Compass
Compass
Pilot .>
Scanning dot
Pilot V Vehicle voltage
Pilot SPD Vehicle speed
aPwr ON
* Shuts down after 3 hours of non-movement
aPwr OFF
AutoPower feature is off
Units ENG * Speed/distance in English units
Units MET Speed/distance in Metric units
Voice ON * Voice announcements on
Voice OFF Voice announcements off
Brt Auto * Automatically adjusts display brightness
Brt Dark
Dark mode
Brt Min Minimum display brightness
Brt Med Medium display brightness
Brt Max Maximum display brightness
Marks DFT
* Default settings
Marks MOD Markers have been modified
rCam ON or OFF (default is on)
sCam ON or OFF (default is on)
sTrap ON OFF
or (default is on)
Othr ON or OFF (default is on)
oSpd ON * Alerts when maximum speed reached (30-95 mph)
oSpd OFF OverSpeed off
Brnd OFF
ESCORT For ESCORT detectors
BEL For Beltronics detectors
aMute ON
* Automatically reduces the audio during alert
aMute OFF AutoMute feature is off
15