Maintenance; Customer Responsibilities; Product Specifications; Lubrication - Craftsman 536.797460 Owner's Manual

3.5 horsepower 9 inch edger
Table of Contents

Advertisement

CUSTOMER
RESPONSIBILITIES
SERVICE
RECORDS
SCHEDULE
Fill In dates
as
After
Before Fie.
E_en/ Every Every Begin
Before
you complete
First
Each
quently
10
25
_Each
Storaga
regular service
2
Use
Hours Hours Hours Season
Hours
SERVICE
DATES
Lubricateall Pivot Points
tJ
Ivj
LubricateWheel Axles
tJ
tJ
Check Engine Oil Level
tf
Change Engine Oil
_
tJ
t,J
!Replace Air Cleaner Filter
Check Spark Plug
p,_
Check Drive Belt
T_ghten All Screws and Nuts
jv j
_'_
Check Blade Wear/Damage
V 'l
PRODUCT
SPECIFICATIONS
HORSEPOWER:
3.5
DISPLACEMENT:
9.06 cu. in. (148 cc)
GASOLINE
CAPACITY:
1.25 qt.
(unleaded regular)
LUBRICATION:
20 oz. SAE-30W
SPARK PLUG:
Champion RJ19LM
(Gap .030)
or Equivalent
GENERAL
RECOMMENDATIONS
The warranty on this Edger does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, the operator must main-
tain the Edger as instructed in this manual.
The above chart is provided to assist the
operator in properly maintaining the Edger.
LUBRICATION
• After each 25 hours of use of your Edger,
apply light machine oil to all moving
parts, particularly
the wheels.
• The oil in the engine crankcase must be
changed after the first 2 hours of opera-
tion and after each 25 hours of use there-
after.
NOTE:
If the edger is being used in sandy
or dusty areas, change the oil more fre-
quently to prevent premature engine wear.
TO CHANGE
ENGINE OIL
• Disconnect
the spark plug wire from the
spark plug.
• Remove the oil drain plug as shown be-
low and drain the oil into a flat pan.
• After draining all the oil, reinstall the oil
drain plug securely.
NOTE: The oil will drain more freely when
the engine is warm.
• Remove the oil fill cap. See figure on
page 8.
• Fill the engine crankcase, pouring slowly.
DO NOT OVERFILL.
For approximate
ca-
pacity see PRODUCT
SPECIFICA-
TIONS.
NOTE: The quill assembly bearings are
factory sealed and will require no lubrica-
tion.
o
• Reconnect the spark plug wire on the
spark plug.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents