Craftsman Radial Arm and Table Saws Leg Stands Model No. 22283A © Save thb manual future reference. WARNING: To reduce the risk of injury, the user must read and understand the operator's o RULES FOR SAFE OPERATION manual before using this product.
The purposeof safetysymbois is to attractyourattentionto possibiedangers. T he safetysymbois, a nd the expianafions withthem, d eserve yourcarefui a ttention a ndunderstanding. Thesafety warnings d onotbythemseives eliminate anydanger. T he instructions o r warnings theygiveare not substitutes f or properaccident p revention measures.
The items incUuded in this kit are: m Large caster (1) m Oenter support m Lower support bracket m WheeU support bracket m Oaster bracket m Release Rever (1) WheeU Hardware Bag: m WheeU (2) m Hex bout, 1/4x 1 3/4 (2) m Lock nut, 1/4 - 20 (2) MOSTTABLE m Large bout, 3/8 x 4 1/2 (1)
ASSEMBLY (NSTRUCT(ONS CENTERSUPPORT HEXBOLT To assemble first side (side with two wheels): HEXHUT, m Remove wheels, hex bolts, and lock nuts from the bag. m Place wheel in slot of the wheel support bracket and FLANGED_ insert hex bolt through both the bracket and the wheel.  Secure with the lock nut and tighten.