Bowflex ULTIMATE Owner's Manual page 9

Using
Folding & Moving
Your Bowflex
Your Machine
Folding and moving your Bowflex is easy. Follow the simple
steps below to fMd your Bowflex. Once it_ fMded, simply tilt
the machine back on its transport wheels and roll it to any
location
1. Remove the leg attachment from the Bowflex, if attached.
2. Lock the seat and bench into place using the spring lock
seat pin.
3. Hook cables into cable storage loops.
4. Bind the Power Rods' with the rod binding strap.
5. Remove the threaded knob on the platfi)rm.
6. Tilt the bench up to the Power Rods'.
7. Screw the threaded knob into the end of the sliding seat rail.
Maintenance & Care Of Your Bowflex:
Your Bowflex requires very little maintenance. To keep your
Bowflex in top condition check all fasteners and rod caps
befi)re each workout and tighten as needed.
Clean the bench with a non abrasive cleaner after each use.
This will keep it looking new. Any non abrasive household
cleaner or soap works well. Many automotive interior cleaners
make surf[ices too "slick" and should not be used.
If you have any questions regarding maintenance
please call our customer service department at
1-800-269-3539.