About The Scsi Setting (For Using Scsi Interface Only) - Panasonic KV-S2048C Operating Instructions Manual

Component Identification

About the SCSI setting (for using SCSI interface only)

(For KV-S2046C / S2046CU / S2046CA / S2026C / S2026CU / S2026CA)
When connecting the scanner to a SCSI chain using a SCSI cable, perform the SCSI ID setting correctly.
The scanner is provided with a DIP switch for the SCSI ID No. setting and the terminator setting.
SCSI ID Setting
ID No.
0
1
2
3
4
5
6
7
SCSI Terminator Setting
Function
Enable
Disable
12
Switch
#2 #1
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
Switch
• The last device in the SCSI chain
ON
• Default setting
OFF Not the last device in the SCSI chain
Remarks
#0
OFF
ON
OFF
ON
OFF
ON
OFF Default setting
ON
Description