How To Re-Attach The Sensor Rollers; Re-Attach The Sensor Roller For Back Scanning To The Adf Door; Re-Attach The Sensor Roller For Front Scanning - Panasonic KV-S2048C Operating Instructions Manual

How to re-attach the sensor rollers

If the sensor rollers are removed, re-attach them.

Re-attach the sensor roller for back scanning to the ADF door

Attach the shorter sensor roller to the ADF door
by placing the non-gear side to the ADF door
release.
• Match the groove to the guide.
• Push the roller, and confirm the sensor is locked
by the springs on both sides.

Re-attach the sensor roller for front scanning

Attach the longer roller to the unit by placing
the non-gear side to the ADF door release.
• Match the groove to the guide.
• Attach the side of the ADF door release first, and
attach the other side.
Confirm both rollers move slightly.
• Press down on the sensor rollers and rotate them.
34
Springs