Cr_Srcinp4 Command; Cr_System Command - Sanyo PLC-XC56 - 3100 Manual

PLC-XC56 Expand Serial Command Functional Specifications
9.7.6

CR_SRCINP4 Command

Command "CR_SRCINP4" [CR]
Details Get selected source of Input 4_S-video
Acceptable
Response Request data
Unacceptable
9.7.7

CR_SYSTEM Command

Command "CR_SYSTEM"[CR]
Details Get selected System
Acceptable
PC Analog
PC-Digital/
AV-HDCP
%
Response
1
Y,Pb/Cb,Pr
Video,S-Vi
Unacceptable
"000_%1"[CR]
"S-VIDEO" ------------- S-Video Input is selected
"Error Code"[CR]
"000_%1"[CR]
"VGA1" -------------- VGA1 is selected
"VGA2" -------------- VGA2 is selected
ÿ
"XGA1"-------------- XGA1 is selected
ÿ
"WXGA3" --------- WXGA3 is selected
"1080i" ------------ 1080i is selected
"1035i" ------------ 1035i is selected
Input is
"720p" ------------- 720p is selected
"575p" ------------- 575p is selected
"480p" ------------- 480p is selected
"575i" -------------- 575i is selected
"480i" -------------- 480i is selected
"MODE1" ------- Mode1 is selected
ÿ
"MODE5" -------------- Mode5 is selected
When there is no signal, projector returns error code"101" [CR]
"Dÿ XGA1" ------------- D-XGA1 is selected
ÿ
"Dÿ WXGA3" ---------- D-WXGA3 is selected
Input is
"Dÿ 1080I" ------------- D-1080i is selected
"Dÿ 1035I" ------------- D-1035i is selected
"Dÿ 720P" ------------- D-720p is selected
"Dÿ 575P" ------------- D-575p is selected
"Dÿ 480P" ------------- D-480p is selected
When there is no signal, projector returns error code"101" [CR]
"AUTO" ----------- Auto is selected
"1080i" ------------1080i is selected
"1035i" ------------ 1035i is selected
"720p" ------------- 720p is selected
Input is
"575p" ------------- 575p is selected
"480p" ------------- 480p is selected
/Cr
"575i" -------------- 575i is selected
"480i" -------------- 480i is selected
Projector returns selected System status regardless of the
signal input.
"AUTO" --------------- Auto is selected
"NTSC" --------------- NTSC is selected
"NTSC443" ---------- NTSC4.43 is selected
"PAL" ------------------ PAL is selected
Input is
"SECAM" ------------- SECAM is selected
"PALÿ M" ------------- PAL-M is selected
deo
"PALÿ N" ------------- AL-N is selected
Projector returns selected System status regardless of the
signal input.
""Error Code"[CR]
49 / 65