Advertisement
Assembly
Instructions
This page will give you an overview
of information
to assemble
your grill. The fbllowing
pages
will show in
step-by-step
detail
how to do so. We offer
the following
suggestions
to make
your
grill assembly
as easy
as
possible.
1.) Read through
the entire Assembly
Instructions
before you begin.
2.) Choose
an area large enough
to comfortably
lay out all the parts
and hardware
with enough
room to easily
maneuver.
3.) Have an area with a non-abrasive
surface
where you can lay parts without
scratching
them.
4.) Use 2 people
to remove
the Cabinet
and Firebox
Assembly
t_om the carton.
You will also need 2 people
to
attach the Casters
to the Cabinet
and Firebox
Assembly.
5.) Lay all parts
and hardware
out and ensure
you have everything
listed on the Parts and Hardware
page before
you begin assembly.
See the Customer
Support
Page
for contact
information
should
any parts
be damaged
or
missing.
6.) A Phillips
Head
Screwdriver
has been provided
for assembly.
We also recommend
a small hammer.
7.) Do not use a Power
Screwdriver
for assembly
as you could
strip the threads
on the Nuts and Bolts.
8.) The propane
tank
for this grill is sold separately.
See the LP Gas and Cylinder
Information
later in this
guide.
BQ04023-1
(BQ51011)
! WARNING
!Failure
to
follow
all Danger,
Warnings,
and
For Your
Safety notices
in this
Grill Guide
may result in serious
bodily iniury
or death, or in a fire
or an explosion
causing
damage
to property.
! CAUTION
!
Perfbrm the Leak Test explained
later in this Grill Guide
before
operating your grill.
!
Advertisement
