BBQ BQ04023-1 (BQ51011) Guide Manual page 11

STEP 5
Insert the side burner valve into the side burner. The
valve should be centered in the stein robe of the side
burner.
STEP 6
Insert the valve stein up through the hole in the side
burner front panel from the back side. Secure to the
side burner front panel using 2 Phillips Head Bolts
(C). Ensure the side burner valve is still centered in
the stein robe of the side burner. If not, center it,
which may involve loosening the 2 Phillips Head
Bolts (C). Attach a Control Knob (F) to the valve
stein using the Hex Wrench (G) to tighten the bolt on
the Control Knob (F). See Insert 2.
\
/
Bolt C
\
Insert 2
Note:
Save the Hex Wrench (G) to tighten
various Control Knobs (F) as
necessary over the life of your grill.