Amana ASD2620HRZ Use & Care Manual page 11

Your refrigerator has either Spillsaver
TM
or non-sealed
shelves. SpiIDaver
TM
shelves have a spill retainer edge
which allows for easier clean up and some are
equipped with the EasyGlidd Mslide out feature. To
slide out (select models}, grasp the front of the shelf
and pull forward. Push in the shelf to return to the
original position.
To Remove a Shelf:
. Slightly tilt up the
front and lift up the
rear of the shelf, then
pull the shelf straight
out+
To Lock the Shelf Unto Another Position:
. Tilt up the front edge of the shelf.
, Insert the hooks into the desired frame openings and
let the shelf settle into place.
Be sure the shelf is securely locked at the rear,
The Crisper Top serves as the lower fresh food shelf,
To Remove the Crisper Top:
, Remove drawers as indicated (see page 12).
Place hand under the frame to push up the glass. Lift
glass out.
To install, repeat above instructions in reverse order,
SideG_ide
TM
She_ves [select models]
SideGlide
TM
Shelves can be
adjusted to create a full-
width shelf, or to slide from
side to side to accommodate
storage needs.
To Remove Shelf Rail
Assembly:
, Lift rail assembly up to remove hooks from frame.
To Unstall Shelf Rail Assembly:
Tilt up the front edge of the assembly.
Insert the hooks into the desired frame openings and
let the rail assembly settle into place,
Be sure the rail assembly is securely locked into the
frame.
To Unstall SideGlide
TM
Shelves for Full-width:
Tilt up the front edge of the shelf slightly.
Hook the rear lip of the shelf over one of the rails on
the shelf rail assembly.
Let the shelf settle into place.
Install the other SideGlide
TM
shelf on the same rail of
the shelf assembly.
To UnstaH SideGlide
TM
Shelves for
Sliding Side to Side:
, Tilt up the front edge of the shelf slightly.
, Hook the rear lip of the shelf over one of the rails on
the shelf rail assembly.
, Let the shelf settle into place.
, Install the other SideGlide
TM
shelf on the other rail of
the shelf rail assembly.
10