Cannot Print Over Wireless Network - Lexmark Intuition S500 User Manual

• The correct printer port is selected.
•
The computer and printer are both connected to the same wireless network.
•
The printer is located away from obstacles or electronic devices that could interfere with the wireless signal.
Make sure the printer and wireless access point are not separated by poles, walls, or support columns containing
metal or concrete.
Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security
system cameras, other wireless networks, and some Bluetooth devices.
Resetting the wireless settings to factory defaults
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Network Setup, and then press
3
Press the arrow buttons to scroll to Reset Network Adapter to Factory Defaults, and then press
.
4
Press the arrow buttons to scroll to Yes, and then press
The printer wireless settings are reset to factory default settings. To verify, print a network setup page.

Cannot print over wireless network

If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer
option when sending a print job, then you can try uninstalling and reinstalling the software.
Before you reinstall the software, check the troubleshooting checklist, and then do the following:
T
URN THE ACCESS POINT
Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network
connections and resolve connectivity issues.
D VPN
ISCONNECT FROM
When you are connected to another network through a VPN connection, you will not be able to access the printer
over your wireless network. End your VPN session and try printing again.
M D M
AKE SURE EMO
Select printer features are not available when Demo Mode is turned on.
From the home screen, navigate to:
> Demo Mode > Off > save the setting
.
( )
WIRELESS ROUTER
SESSION
ODE IS TURNED OFF
.
OFF AND THEN BACK ON
Troubleshooting
110
.