Specifying Default Copy Settings; Specifying Default Copy Function Settings; Setting Example - Muratec MFX-2550 Guide Manual

Specifying Default Copy Settings

The default values are those applied when you press <Reset>.
The machine returns to the default settings if it is left without any operation for a
designated period of time.
Changing the default values of often-used functions can shorten the time required to
adjust settings.
Other settings are useful default settings.
Note
You can set the time it takes to return to the default settings. For details, refer to
Chapter 1, "Specifying Default Settings" in the Administrator's Guide.

Specifying Default Copy Function Settings

You can change the default values and other settings for the copy function. For
information on the items and settings that can be specified, refer to
Settings" (see page 3-5)
„ Setting Example
Here the procedure for changing the default document type is described as an example.
1
Press <Setting>.
2
Press [Default Settings].
3-2 Specifying Default Copy Settings
and "List of Other Settings"
"List of Default Copy
(see page 3-5).