Reduction / Enlargement - Muratec MFX-2550 Guide Manual

4
Use the numeric keys to enter the number of copies.
• You can set 1 to 99 copies.
• When the number of copies is not set, one copy will be made.
5
Press <Start>.

Reduction / Enlargement

Adjust the magnification setting to reduce or enlarge the image (specified zoom ratio).
When specifying the zoom ratio, you can specify a default zoom ratio or any freely set
zoom ratio.
Note
• When enlarging the copy, you can only use the document glass to scan.
• You can set a zoom ratio between 25% and 400% when using the document glass
and between 25% and 100% when using the ADF.
• Depending on the selected zoom ratio, some of the image may be left out or there
may be extra blank areas on the paper.
• The paper is automatically selected according to the zoom ratio. To select the paper
to use, select the cassette containing the paper you want to use for copying from the
touch panel.
1
Load the document, and press <Copy>.
• For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
• Set the document type
2
Press [Advanced].
1-10 Basic Copy Settings
(see page 1-6) and contrast (see page 1-7), as necessary.