Advertisement
Available languages
Available languages
12. Install t hegrass-catcher pin (911-04069) fromhardware pack689-
00092Bintotheholeprovided in theupperportionofthechuteelbow
andsecurewitha flangelocknut(712-3027). SeeFig.22.
f
Figure24
13.
Figure 22
Install r ubberstrap(723-04008A) ontothechutetubeextension using
clevispin (711-05063), flat washer (736-0204) a nd bow-tie cotterpin
(710-04040) fromhardware pack689-00092B. Attachtheendwith
theholeclosest t o theendofthe strap,asseenin Fig.23.Thiswill
makeit easierto grabontothestrapto pull,stretch and hookontothe
grass-catcher pin installed on thechuteelbowin theprevious step.
Figure23
14. With the tractor'sdischargechute raisedup and held open,install
the chuteelbowoverthe chuteopeningby placingthe deck
mountingpin in the hole provided,as seenin Fig. 24,then secure
the elbowto the deck by hookingthe retainerstrap hookoverthe
deck wheelmountingbracketas seenin Fig. 25.
Note:
On deckswithoutdeck wheels,hookthe retainerstrap
intothe hole providedin theflangeon thefront-sideof the cutting
deck.
Figure 25
13
Advertisement
