GE Monogram ZGU48N4G Owner's Manual page 24

The Problem Solver
Sla ir_less Sleel ( ooklop
Questions ?
B bre you
call jbr
service...
PROBLEM POSSIBLE CAUSE
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
BURNER CONTROL
KNOB WILL NOT
TURN
• Electrical ph,g is not plugged into a live power outlet.
• Gas not turned on.
• Burner parts not replaced correctly.
• Holes in tile simmer rings or slits in tile bm'ner rings are clogged.
• Clogged orifice, or wet
btlI'IleFs oF
electrodes.
• Bm'ner parts not replaced correctly.
A. Yellow flames: Call for
service.
B. Yellow tipsonouter cones:
NormalforLPgas.
C. Softblueflames: Normal
for natural gas.
• If bm'ner flames look like (A), call for service. Nomml bm'ner flames
should look like (B) or (C), depending on tile type of gas.
• If cooktop is connected to I,P gas, contact the person who installed
VO/li" cooktop or i/lade tile COllversioll.
• When tile knob is at tile OFF position, it must be I)ushed in before
it can be tin'ned, and it can only be tin'ned in a com_terclockwise
direction. Similarly; when the knob is in the I,OW or X-HI
positions, it must also be i)ushed in to change flame settings.
24