Epson Continuous Ink Supply System Installation Instructions Manual page 4

Circumgyrate screwdreiver
deasilly
4) Fourth step: Set up the Continuous Ink Supply System
Remove original cartridge
5) Fiveth step: Fix Support Arm
Tear off the sticker
Fix the balance arm
Separate the right side of
cartridge-car
Insert our no-sponge cartridge
into printer carefully
Fix the arm on the 25cm right far from
you printer
Tear off the sticker of clamp
Take off the cover of cartridge-car
Close the cover for cartridge
Tear off the sticker
Attached the clamp on your printer
and let it parallel with printer