Lower Rear Cover; Access Plates R And F - Brother MFC 9760 - B/W Laser - All-in-One Service Manual

1.1

Lower Rear Cover

(1) Remove the three screws (two "a" and one "b") from the lower rear cover. Screw "b" is
provided on those models available with a 2nd paper cassette (as an option).
(2) Lightly pressing sections "X," pull out the lower rear cover.
1.2

Access Plates R and F

(1) Remove screw "c" that secures access plates R and F together to the main chassis.
(2) Remove screws "d" and "e" from access plate R.
(3) Take out access plates R and F together.
(4) Remove screw "f" to separate those access plates.
n n n n
Reassembling Notes
• When reinstalling access plate F, fit the two tabs provided on the front end underneath the
center edge of the main chassis.
"a" and "b": Screw, pan (washer) M4x10DB
"c" to "f": Taptite, cup S M3x6
IV - 4
(Tightening torque: 0.5 N•m)