Relay Pcb - Brother MFC 9760 - B/W Laser - All-in-One Service Manual

1.8

Relay PCB

(1) Disconnect the following harnesses from the relay PCB:
- Speaker harness
- Main-relay (panel) harness
- Main-relay (CCD) harness
- Main-relay (motors) harness
(2) Remove the two screws.
(3) Take out the relay PCB.
Reassembling Notes
• When setting the relay PCB back into place, be careful with the installation direction. The
printed letters should not be upside down.
IV - 25