Brother MFC 9760 - B/W Laser - All-in-One Service Manual page 125

- - - - - - - - - - - - - - - - - - - - - - - - - -
Basically, the maintenance-mode functions listed on the previous page should be accessed by
service personnel only. However, you may allow end users to access some of these under the
guidance of service personnel (e.g., by telephone).
The user-accessible functions (codes 10, 11, 12, 80, 82, 87 and 91) are shaded in the table given
on the previous page. Function code 10 accesses the firmware switches (WSW), each of which
has eight selectors. You should not allow end users to access all of those selectors, but you may
allow them to access user-accessible selectors which are shaded in the firmware switch tables in
Subsection 3.5.
The service personnel should instruct end users to follow the procedure given below.
(1) For machines w/ fax:
Press the Menu and Resolution keys in this order.
For machines w/o fax:
Press the Menu and Sort keys in this order.
The LCD clears the current display.
(2) Press the 0 key.
(3) Enter the desired function code (10, 11, 12, 80, 82, 87, or 91) with the numerical keys.
For function code 10, access the desired firmware switch according to the operating procedure
described in Subsection 3.5.
(4) To make the machine return to the standby state, press the Stop key.
MFC9800/MFC9880
MFC9860
IMPORTANT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Menu key Resolution key
Menu key Resolution key
V - 3
0 key Stop key
0 key Stop key