Brother MFC 8890DW - B/W Laser - All-in-One User Manual page 164

d
Fan the paper stack, and then put it back
in the MP tray.
e
When loading paper in the MP tray,
make sure that the paper stays under
the maximum paper height guides on
both sides of the tray.
Paper is jammed in Paper Tray 1 or
Tray 2
If the LCD shows Jam Tray 1 or
Jam Tray 2, follow these steps:
a
Pull the paper tray completely out of the
machine.
For Jam Tray 1:
148
For Jam Tray 2:
b
Use both hands to slowly pull out the
jammed paper.
C
c
Make sure the paper is below the
maximum paper mark (b) of the paper
tray. While pressing the blue paper-
guide release lever, slide the paper
guides to fit the paper size. Make sure
that the guides are firmly in the slots.
d
Put the paper tray firmly back in the
machine.
IMPORTANT
DO NOT take out the standard paper tray
while paper is feeding from a lower paper
tray as this will cause a paper jam.